@gibbsyns3 You could use the C6 WDS feature with C1200 as a main router - it might work - you just have to test it, regardless that C1200 doesn't have WDS implemented. For WDS to be built only the...

@Leonardo_ala When you're addressing http://192.168.1.1:4000 you're expecting that your VR400 has a service running on port TCP 4000 - which I suppose it doesn't. If the service in question is...

@Leonardo_ala What about 192.168.1.33:4000 ? Is this the device (192.168.1.33) that's running the service in question on its port 4000 ? You should be able to access that from your local network....

@ElTom If you you're not going to build a mesh network and planning to use these APs in a standalone mode then you don't need the OC200 controller and the HW in question will suffice.

@davidec Check this guide for details on PoE to TP-Link APs.

@Par098 That's usually a physical connectivity issue. Given your description the joint connection ( kitchen jack ) is probably the culprit. If you use an ethernet cable tester you should be able to...