@bigkenny1a Yes, with the hardware you have I believe so. Here's the difference between router and AP mode. The features that you need and not available in AP mode, should be enabled on your main...

@ThePuuma One way to use these devices together and to be sure that there's no wireless interference between them, is to turn off the wireless radio of the Plusnet hub and leave the AX73 as the only...

This is the steps you can use to isolate a host from your local network to access the Internet, but remain accessible in the local network (older green UI). In this particular case TL-WR841N Access...

@Rick108 Actually you don't have to buy a new router, you may continue to use the A7 (with Wi-Fi disabled) and buy 3pcs Deco system. Then connect and set the Deco system in AP mode. PowerLine...

@Brejkax WDS should be configured only on the extended router. You main router don't have to be re-configured - here's the guide.

@bigkenny1a Your main benefit from using AX50s in AP mode (Case 1) is avoiding double NAT in your network. If you set AX50s in router mode the communication between devices connected to different...