After a random period of time the router stops giving out ip addresses the DHCP server is not accessible so all the clients are unable to access the Internet or anything until router is rebooted

I have two EAP245's that have to be mounted on the wall, close to the ceiling. Will using a metal L-bracket such as this cause any signal problems? The brackets measure about 8" x 8" x 1.5". The plast

I Didn't set this up btw!!!! Here's the story: 25m run from router to an extender switch, then a further 10m to the outside office. There is then a network socket in the walls in which another switch

Two questions: Is there an easy way to disable the entire WLAN? The only way I see to do this is to disable the WLAN on each EAP or disable both the 2.4 and 5GHz radios on each and every EAP. Isn't th

When I receive an email alert about router was shut down, the time in the email is incorrect. This was send on 4/19/22. But the time in the email I get along with what shows in the Log in Omada shows

We're having an issue where the routers connection drops completely to the web, we have hardwired connections that also fail with it, so not a wifi issue, but drop outs last 5-10 minutes and require a