Following: 0Followers: 0
Forums/ Switches
By MikeW1 Sunday

Omada SG2008p port Gi1/0/3 was blocked.

Omada (Linux) V5.9.31, SG2008P V3.20.1 & V1.0.9, EAP225-Outdoor V5.1.6, ER7206 V1.3.0 (1 Wan, 1 LAN) RSTP enabled 2 of the EAP225-Outdoor are mesh. The Ethernet is to client devices. When the BLOCKING
Forums/ WiFi
By MikeW1 a week ago

EAP225-outdoor trying to identify ports

snmpwalk give me the following if Descriptions: IF-MIB::ifDescr.1 = STRING: lo IF-MIB::ifDescr.2 = STRING: eth0 IF-MIB::ifDescr.3 = STRING: sit0 IF-MIB::ifDescr.4 = STRING: br0 IF-MIB::ifDescr.5 = STR
Forums/ Controllers
By MikeW1 2023-01-27 20:35:43

Omada-ER7206 port forwarding

Omada 5.7.4 Linux ER7206V1 FW 1.2.3 Build 20221104 I am attempting to pass ssh(22) from the Internet to a specific server. Is there the ability for port mirroring with the ER7206 or are the counters t
Forums/ Controllers
By MikeW1 2022-12-12 17:28:27

Second ER7206 needed in network

A configuration I have used at a number of locations is to have a router on one ISP with my inside default gateway address and at another part of the campus a router connected to a second ISP with a u
Forums/ Routers
By MikeW1 2022-09-26 18:44:04

Snmpwalk through ER7206 router

I have a set of bridges between the AT&T connection and my ER7206 router. I can reach to bridges (HTTPS) and from the outside network I can snmpwalk the bridges, but timeout when trying to walk from m
Forums/ Switches
By MikeW1 2022-09-26 18:38:34

trying to update SG2008P V1.60 get wrong firmware

have 3 SG2008P V1.60 switches. I try get firmware it says download is: TL-SG2008P(UN)_V1.6_1.0.5 Build 20220909 but downloads TL-SG2008P(UN)_v1_1.0.5_20220909 Figured they must be the same and attempt