Hi: My setup is: There is a fiber SFP SFU ONU device on the SFP slot, a PPPOE connection is established there on internet vlan nnnn. The ISP also pushes other traffic on this port, namely a multicast

I recently noticed under wifi settings, when creating an ssid it now has an 802.11r option and its unchecked by default. I already have fast romaing enabled in the site settings so why was this added

Dear all. I used to manage two old T1500G-8T v2.0 switches via Omada Software controller. And although they are not listed as supported devices any more, it was still working. Now, I needed to reconfi

I have a simple need: VLAN 1 to be used as is for all AP's (8) guest wireless VLAN 2 to be used for Office Computers, IP phones Problem: I have 5 switch installations. All 5 switches will need VLAN 1

Is there any way to use the SFP port with a copper RJ45 cable? Thanks for your help.

My network uses a 5-port smart switch (TL-SG105E) to distribute 2 subnets and is configured for port based VLANs. VLAN 1 uses two of the ports and VLAN 2 uses the other three ports. VLAN 1 is cabled t