Forums/
Business Switches
Monday
TL-SG3210 SFP port
Is there any way to use the SFP port with a copper RJ45 cable? Thanks for your help.
Forums/
Business Switches
Sunday
LAN dropping to 100Mbps from 1000 with TL-SG108E
My network uses a 5-port smart switch (TL-SG105E) to distribute 2 subnets and is configured for port based VLANs. VLAN 1 uses two of the ports and VLAN 2 uses the other three ports. VLAN 1 is cabled t
Forums/
Omada Cloud SDN
Sunday
Separate DHCP IP range for VLAN?
Is it possible to have a separate DHCP range for a VLAN? I.e., for the default vlan 0 network, the DHCP range is 192.168.100.1/22 and then VLAN #3 is 192.168.3.1/22 I have see a post elsewhere saying
Forums/
Requests & Suggestions
a week ago
SFP WAN of GATEWAY is down - precise meaning needed
Hi: In my installation when the SFP WAN connection fails the following messages show in the controller (error icon) [SFP WAN] of GW-CORE is down. (info icon) [Failed]GW-CORE: PPPoE user@domain failed
Forums/
Business Routers
a week ago
ssh read/write access
Hi: In recent 1.3.1.x betas the regular SSH interface of a very useless limited linux shell has changed to a cisco-style command interface, but I find absolutely no way to enter privileged mode.. enab
Forums/
Omada Cloud SDN
a week ago
power outage and OC200 faulted
So i had a power outage and when everything came back online, my OC200 controller was offline. all the lights were on but no one was home. After struggling with it, i decided to reset it and try and u