Switches
TP-Link Business Switches are comprised of JetStream series and LiteWave series, which are designed to offer reliable and professional choices to businesses of all sizes. Anything related to TP-Link's JetStream or LiteWave Switches, welcome to ask questions, join discussions and share your experience/ knowledge here.
Switches
Setup is as in the picture, problem is that I cannot get the 200 network to work on eth3 on the TL-SG105E V5. Everything else works fine. Thanks jcbh
By
jcbh
1Helpful
221Views
I have two managed layer-3 switches (TL-SG3452P and TL-SG321XHP-M2) connected to an TL-ER7206 router. My network has five VLANs. Each switch has settings (L2 Features > Multicast > IGMP Snooping) for
0Helpful
619Views
expect engineer support advice: My company connects to the internet via the omada controller system with a speed of 100Mbps, but the device can only test the speed at 40Mbps Connecting devices: Modem
0Helpful
573Views
Hello, I understand basic VLAN configuration, but with what I want to do I'm a bit lost, could you please help? I want to setup a VLAN with my TL-SG105E that can communicate with the internet but that
0Helpful
324Views
Hi, Fritzbox modem/router on 192.168.2.1 Replacing an unmanaged 24 port TP-Link. Wanting to set the Intel X520-DA1-82599EN Chip on static 192.168.2.4. (255.255.255.0) If I do, my PC that has always be
0Helpful
925Views
I I bought a new TL-SG2428P V4 to use as standalone switch (I will use it as member in Omada Controller in the future). I can not find new firmware. The support page https://www.tp-link.com/en/support
1Helpful
930Views
Model : T1600G-28PS Hardware Version : V2 Firmware Version : 2.0.0 Build 20160922 Rel.58984(s) ISP : gday, The support web dont seem to have the latest V2 firmware. any ideas if there is a new version
2Helpful
6564Views
Hello There, I am Facing this Problem in Load Balance while looking into system Log this Message appear and suddenly Internet service went down, Someone please let me know the issue please "Detected L
1Helpful
649Views
I have setup multicast on a T2600G switch. Very basic configuration for the time being (5 ports activated : 1 router + 4 devices). IGMP : activated on VLAN 1 No static router ports defined. MLD : acti
0Helpful
791Views
Hi all, any help welcome. I dug up a TL-SG108E and changed its IP address to it didn't clash with my router. All was fine through the web interface via the new local IP address so I then went to check
0Helpful
493Views