LB100 - what happens when i cut power to the lightbulb??

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

LB100 - what happens when i cut power to the lightbulb??

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
LB100 - what happens when i cut power to the lightbulb??
LB100 - what happens when i cut power to the lightbulb??
2018-01-22 04:02:00
Model :

Hardware Version :

Firmware Version :

ISP :

I have an LB100 connected and working.But when i turn off the bulb with the wall switch or there is a powerFailure...it doesn't seem to reconnect after I restore power or turn on The wall switch? Is it supposed to reconnect or do i need to reconfigure again??
  0      
  0      
#1
Options
1 Reply
Re:LB100 - what happens when i cut power to the lightbulb??
2018-01-22 12:23:52
It should reconnect (and will usually turn on). It might not be working well, another power cycle might do it or you may need to reposition it or your router. Or it may have connected but has received a new IP from your router, if your phone is connected to your 5GHz band in a dual band router it may not be able to find the bulb as it connects to the 2.4GHz band. You might try enabling remote access and/or connecting your phone to the 2.4GHz band.
  0  
  0  
#2
Options