Archer VR200v (DS-lite) got no IPv4

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer VR200v (DS-lite) got no IPv4

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer VR200v (DS-lite) got no IPv4
Archer VR200v (DS-lite) got no IPv4
2018-02-05 03:59:31
Model :

Hardware Version :

Firmware Version :

ISP :

Hello folks,

iam in Germany on a VDSL connection by 1und1 and want to replace my FritzBox 7412 by the VR200v but can't get any internt connection.

At the first step, the xDSL handshake, everything works fine, but after that nothing more happen. A closer look to the advanced feature page brings up that the device retrieve IPv6 adresses but no IPv4 adresses.

After that i see in my FritzBox that there is also no native IPv4 instead just DS-lite (v4 through v6) adresses. The VR200v manual "hide" on page 114 is a very small sentence for some DS-lite settings, just enable it and select the device. I did like the manual describe but the router receive also no IPv4 Adresses.

[CODE]1970-01-01 01:00:48 [6] PPP: ppp0 sent [PADI Host-Uniq(0x000007e0)]
1970-01-01 01:00:49 [5] DSL: xDSL Ready!!
1970-01-01 01:00:52 [5] DSL: xDSL Handshake!!
1970-01-01 01:00:53 [6] PPP: ppp0 sent [PADI Host-Uniq(0x000007e0)]
1970-01-01 01:00:55 [5] DSL: xDSL Training!!
1970-01-01 01:01:03 [6] PPP: ppp0 sent [PADI Host-Uniq(0x000007e0)]
1970-01-01 01:01:06 [5] DHCPD: Recv REQUEST from 74:DE:2B:86:DB:08
1970-01-01 01:01:07 [5] DHCPD: Send ACK to 192.168.1.101
1970-01-01 01:01:23 [3] PPP: ppp0 Timeout waiting for PADO packets
1970-01-01 01:01:23 [3] PPP: ppp0
1970-01-01 01:01:24 [5] DSL: xDSL Enter Showtime!!
1970-01-01 01:01:24 [6] PPP: ppp0 sent [PADI Host-Uniq(0x00000b1b)]
1970-01-01 01:01:24 [6] PPP: ppp0 rcvd [PADO PeerMac(54-51-1b-83-bb-bb)]
1970-01-01 01:01:24 [6] PPP: ppp0 sent [PADR Host-Uniq(0x00000b1b)]
1970-01-01 01:01:24 [6] PPP: ppp0 rcvd [PADS SessionID(0x0e23)]
1970-01-01 01:01:24 [6] PPP: ppp0 sent [LCP ConfReq id=0x1 ]
1970-01-01 01:01:24 [6] PPP: ppp0 rcvd [LCP ConfAck id=0x1 ]
1970-01-01 01:01:27 [6] PPP: ppp0 rcvd [LCP ConfReq id=0x2 ]
1970-01-01 01:01:27 [6] PPP: ppp0 sent [LCP ConfAck id=0x2 ]
1970-01-01 01:01:27 [6] PPP: ppp0 sent [LCP EchoReq id=0x0 magic=0x6f27cd42]
1970-01-01 01:01:27 [6] PPP: ppp0 sent [PAP AuthReq id=0x1 user="" password=]
1970-01-01 01:01:27 [6] PPP: ppp0 rcvd [LCP EchoRep id=0x0 magic=0xc11bb891]
1970-01-01 01:01:27 [6] PPP: ppp0 rcvd [PAP AuthAck id=0x1 "[UI-SBR:25088,5056;UI-LINEID:1UND1.DEU.DTAG.6FLY7;]"]
1970-01-01 01:01:27 [6] PPP: ppp0 sent [IPCP ConfReq id=0x1 ]
1970-01-01 01:01:27 [6] PPP: ppp0 sent [IPV6CP ConfReq id=0x1 ]
1970-01-01 01:01:27 [6] PPP: ppp0 rcvd [IPV6CP ConfReq id=0x1 ]
1970-01-01 01:01:27 [6] PPP: ppp0 sent [IPV6CP ConfAck id=0x1 ]
1970-01-01 01:01:28 [6] PPP: ppp0 rcvd [LCP ProtRej id=0x3 80 21]
1970-01-01 01:01:28 [6] PPP: ppp0 rcvd [IPV6CP ConfAck id=0x1 ][/CODE]

A further thing i see is that (maybe since the beginning, but maybe since the last time, cant remember) there are also no IPv6 DNS Server IPs available.

I updated the firmware to: 0.8.0 0.25 v002f.0 Build 160809 Rel.52803n
Hardwareversion: Archer VR200v v1 00000000

Help is very appreciated
the fish
  0      
  0      
#1
Options
1 Reply
Re:Archer VR200v (DS-lite) got no IPv4
2018-05-13 02:32:48
seem normal part of negotiation (IP/GW)
The next lines would be interesting. (like Term)
Which provider-profiles did you use?
Have you tried other profiles?
Which VLAN did you use?
You should configured same parameters as for the FB.

open telnet 192.168.1.1 (ssh not working) and exec following cmd:
adsl show status
wan show defaultgw
wan show service

IPv6 are very experimental.
You'd better report it tp-link-support directly
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 559

Replies: 1