VR2800 lower sync observations compared with VR600v

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
VR2800 lower sync observations compared with VR600v
VR2800 lower sync observations compared with VR600v
2018-02-28 22:14:07
Model :

Hardware Version :

Firmware Version :

ISP :

Hi there

Yesterday bought the VR2800 after buying VR600v 2 weeks ago. I am on VDSL 50 down 5 up in Greece and what surprised me is the following. Both sync at full speed of course which is fine but the difference is with the max attainable speed where my VR600v reaches 62Mbps and my VR2800 now syncs at 57-58Mbps. I bought these two specific models because they have Broadcom modem chipsets and since the VR2800 has the newest BCM 63138 and the VR600v has the BCM 63168U (my Cabin where i connect has BCM chips) and i thought that VR2800 would be at least the same as the VR600. It is also strange that when i first set VR2800 up (with the firmware it came on) it synced at 60-61, when i upgraded the firmware to version 0.3.0_0.9.1, it never gave me syncs more than 57,5mbps. Obviously i removed the VR2800 from my connection and i am again using the VR600v having the best syncs.

Any views on that or similar experiences? Can i downgrade to the version it came with? That version was 0.1.0.....

Thanks
0
0
#1
Options