Home Network Community > DSL Modem Routers > VR 2600 v - Phone Calls are not completetd
< DSL Modem Routers

VR 2600 v - Phone Calls are not completetd

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

VR 2600 v - Phone Calls are not completetd

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
VR 2600 v - Phone Calls are not completetd
VR 2600 v - Phone Calls are not completetd
2018-03-22 18:14:22
Model :

Hardware Version :

Firmware Version :

ISP :

Hello.
Since 2 month I am using the TP Link VR 2600 v Router with German Telekom as ISP.

Internet and phone is working but ...

I need help with the following problem:

--> If I want to make phone calls, it occurs, that these calls are not completed.
I dial the number,
I can hear the sound of dialing
... than - after a certain time - the line is mute and I hear the "occupied" signal.

I called my ISP (Telekom) and we figured out, that this happens, if the number I want to call is located by the German Vodafone.
If I call the same phone number by using a "call by call" provider, the call is completed correctly.

Can anybody please give me a hint or the solution ?

Thanks and kind regards.



  0      
 
  0      
 
#1
Options
12 Reply
Re:VR 2600 v - Phone Calls are not completetd
2018-03-27 17:36:19
try to diable SIP-ALG under NAT forwarding--ALG.
have you asked telekom why the call is not completed if you call German Vodafone.? they should be able to tell you more info.
  0  
  0  
#2
Options
Re:VR 2600 v - Phone Calls are not completetd
2018-03-30 03:50:15
I have same problem. They say it depends on codec. vodafone does not support PCMu. I cant find where to choose the codec.
  0  
  0  
#3
Options
Re:VR 2600 v - Phone Calls are not completetd
2018-03-30 14:29:50
i can't find codec in the menu, either.
but you can try disable SIP-ALG under forwarding--ALG settings
also enable voip qos under QOS--put voip on the high priority list.
  0  
  0  
#4
Options
Re:VR 2600 v - Phone Calls are not completetd
2018-03-30 14:49:59
i think it is better to contact tp-link support so they can solve this issue.

franco111222 wrote

I have same problem. They say it depends on codec. vodafone does not support PCMu. I cant find where to choose the codec.
  0  
  0  
#5
Options
VR 2600 v - Phone Calls are not completed
2018-03-31 21:23:06
Thank you all so far for your answers and hints.

@ Kevin SG
I tried your advice and have disabled SIP-ALG.
No difference. The problem continues ... :(

@ Shield101
Tested your hints too. no difference. The problem ist still the same :(

I have been in touch with the technical dept. of Telekom and they tested my line. Everything fine.
I have installed and tested an original Telekom router an a Fritz-box on my line too. With both the problem was not detected.

Therefore I am sure up to 99 %, that it is a problem with the TP-Link router :eek:

@ vieldcs
I'll do that and inform the TP-Link support.

If anybody has an other idea, please ...

Kind regards and happy Easter days :)
  0  
  0  
#6
Options
Re:VR 2600 v - Phone Calls are not completetd
2018-03-31 21:34:15
Thanks to all for your answers and hints.

I made the modifications as suggested from Kevin and Shield - but there was no difference. The problem still continues :(


I have contacted the technical department of German Telekom. They have tested my phone line and told me that everything is o.k.

Also I made two tests.
At first with a original Telekom router and than a secound wit a Fritz-box router.
In both tests the problem was not detectable and present.
Connecting again my TP-Link router the problem returned. :(

Therefore I am 99 % sure, that it should be a issue of the TP-Link router ...

Anybody has further ideas or hints ?

Thanks for your replies and nice Easter days !
  0  
  0  
#7
Options
Re:VR 2600 v - Phone Calls are not completetd
2018-04-02 01:52:06
I have the same problem as Alex (you are not alone! ;) . Provider is also German Telekom.However, I suspect that the not working numbers are of people with "ISDN numbers" (so not SIP, VoIP yet).The problem is present for at least 3 month. Can we get a statement from Tp-link? Thank you!
  0  
  0  
#8
Options
Problem with Vodafone
2018-04-03 05:06:26
Hi,

look here.

forum.tp-link.com/showthread.php?106769-How-to-set-codec-on-Archer-VR2800v

best regards

Frank Radermacher
  0  
  0  
#9
Options
Re:VR 2600 v - Phone Calls are not completetd
2018-04-03 16:03:49
Thank you very much for your hint franco111222

But I am not sure, if I can use these firmware for my router too. Finally it is posted for a VR2800v router



03-30-2018 09:57 #4
tplink

AdministratorJoin DateMar 2012Posts447

[COLOR=#333333]
Dear Customer

Please kindly try this beta firmware for your problem. Beta Firmware link is<[COLOR=#222222] http://support.tp-link.com/f/a185defe99/?dl=1>.
If this firmware has solved your problem, please let us know and we will add the fixes into our next official firmware.

Please note: The firmware has 30 days limit to access and download.

Thank you very much for your support of tp-link products!





:confused:
  0  
  0  
#10
Options
Re:VR 2600 v - Phone Calls are not completetd
2018-04-03 16:37:44

RLink wrote

I have the same problem as Alex (you are not alone! ;) . Provider is also German Telekom.However, I suspect that the not working numbers are of people with "ISDN numbers" (so not SIP, VoIP yet).The problem is present for at least 3 month. Can we get a statement from Tp-link? Thank you!


Thank you :-)
I have contacted TP-Link to clearify these issue ...
  0  
  0  
#11
Options
12

Information

Helpful: 0

Views: 1651

Replies: 12

Related Articles
Use of the router for phone calls
1033 0
 archer vr 600 v startet nicht mehr
323 0
 Archer VR 400 V.30 ,5Ghz is not stable
272 0
 Boost my mobile phone signal for calls (not data)
649 0
 Archer VR600v: DECT phone and 'missed calls'
730 0
 Archer VR600v: DECT phone and 'missed calls'
1163 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.