VR2800 and VoIP issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

VR2800 and VoIP issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
VR2800 and VoIP issue
VR2800 and VoIP issue
2018-03-25 20:14:01
Model :

Hardware Version :

Firmware Version :

ISP :

I recently upgraded from a VG3631 to the VR2800. With the VG3631 I had VoIP setup and working fine these past couple of years. With the VR2800 I added an OBI202 ATA so I could continue to use VoIP.

The issue is I can make calls out OK from the attached Uniden handset, but I can't call in.

The SIP packets never make it past the VR2800 to the ATA. Thinking it might be an ATA issue, I attached an old Linksys Sipura in place of the OBI. Same thing, can call out but not call in.

I tried disabling the SIP ALG, as was suggested by others, but didn't help. Set up ATA as DMZ, still no dice. Setup port forwarding for 5060-5070 UDP/TCP to the the ATA's static IP, again, no enchilada.

Revert back to using the VG3631 with inbuilt VoIP, and bingo, all working again. So, can someone help me out here please, as I've wasted too many hours already on this.
Thanks
  0      
  0      
#1
Options
5 Reply
Re:VR2800 and VoIP issue
2018-03-28 10:18:31
from my point of view, you may contact tp-link support and ask for troubleshooting.
  0  
  0  
#2
Options
Re:VR2800 and VoIP issue
2018-07-25 17:11:03
I have got the resolution for the same via contacting customer support I was facing issue with my New York virtual phone number in VoIP service not really with hardware.
  1  
  1  
#3
Options
New York Virtual Phone Numbers
2021-12-20 08:12:04

 

Pursue a New York virchul phone number and remain associated with your clients in the Big Apple. Our quick, cost-let loose set can make them get brings in only 3 minutes.

 your New York virtual number accompanies a scope of cutting-edge benefits. Use the assistance of our devoted help group, and utilize your internet based dashboard to add, eliminate or alter your current numbers effortlessly.https://www.mycountrymobile.com/virtual-phone-numbers/

  0  
  0  
#4
Options
virtual phone number
2021-12-20 12:02:24 - last edited 2021-12-20 12:11:57

 

Uralla wrote

Model :

Hardware Version :

Firmware Version :

ISP :

I recently upgraded from a VG3631 to the VR2800. With the VG3631 I had VoIP setup and working fine these past couple of years. With the VR2800 I added an OBI202 ATA so I could continue to use VoIP.

The issue is I can make calls out OK from the attached Uniden handset, but I can't call in.

The SIP packets never make it past the VR2800 to the ATA. Thinking it might be an ATA issue, I attached an old Linksys Sipura in place of the OBI. Same thing, can call out but not call in.

I tried disabling the SIP ALG, as was suggested by others, but didn't help. Set up ATA as DMZ, still no dice. Setup port forwarding for 5060-5070 UDP/TCP to the the ATA's static IP, again, no enchilada.

Revert back to using the VG3631 with inbuilt VoIP, and bingo, all working again. So, can someone help me out here please, as I've wasted too many hours already on this.
Thanks

I am using my free virtual call number...

it so uses full for me and my business.

so follow this link

https://www.mycountrymobile.com/

  0  
  0  
#5
Options
virtual phone number
2021-12-20 12:13:38
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 2232

Replies: 5

Related Articles