Archer C1200 v2.0 always auto reboot
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hardware Version : Archer C1200 v2.0
Firmware Version : 2.0.2 Build 20180118 rel.38979 (EU)
ISP :
It always auto reboot randomly an the wifi is always drop without any reason, please fix it.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello, sorry for any inconvenience caused for the reboot issue you encountered with the Archer C1200 router.
Please ensure you are running the latest firmware on your C1200 router, which can be downloaded from the TP-Link official website. If you still encounter the auto-reboot issue when running the latest version, please check the below beta firmware that provided by the R&D:
Archer C1200(EU)_V1: https://static.tp-link.com/2020/202001/20200103/Archer C1200(EU)_V1_180308(Beta).zip
Archer C1200(EU)_V2: https://static.tp-link.com/2020/202001/20200103/Archer C1200(EU)_V2_180308(Beta).zip
Archer C1200(US)_V1: https://static.tp-link.com/2020/202001/20200103/Archer C1200(US)_V1_180308(Beta).zip
Archer C1200(US)_V2: https://static.tp-link.com/2020/202001/20200103/Archer C1200(US)_V2_180307(Beta).zip
Below is the guidance to install it manually on your router (Method 2):
https://www.tp-link.com/support/faq/2139/
Note: This beta firmware is mainly built for the auto-reboot issue on the Archer C1200 router, if yours is not the auto-reboot issue, DON'T upgrade to this firmware. Meanwhile, please verify the hardware version and region version first before the upgrade, a wrong firmware upload may brick your device and void the warranty, thanks a lot~
- Copy Link
- Report Inappropriate Content
Archer C1200 (EU)_V2_180308(beta): http://support.tp-link.com/f/c67e6e765a/?dl=1
I met the same issue before and tp-link support provide this beta FW which solved my issue.
- Copy Link
- Report Inappropriate Content
flying snow wrote
oh, you may try this beta FW:
Archer C1200 (EU)_V2_180308(beta): http://support.tp-link.com/f/c67e6e765a/?dl=1
I met the same issue before and tp-link support provide this beta FW which solved my issue.
Thank you so much
- Copy Link
- Report Inappropriate Content
hi ic3b34r,
the new firmware solved your problem ?
thanks
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, here is another download link:http://support.tp-link.com/f/b8a47891b4/?dl=1. I tried this one, and it worked. So it's worth a shot.
- Copy Link
- Report Inappropriate Content
Could you provide a valid link again, please? I've been having this issues and I cant find that firmware... :s
- Copy Link
- Report Inappropriate Content
Attempt the below, one at a time, to observe the outcome:
- Feel the router, if the router is hot or lots of heat coming out, use a fan to cool the router, a regular fan or USB fan is fine.
- Set the WiFi Transmit Power to low (if the setting is currently set to high), and see if this helps with the reboot.
- Turn the WiFi off completely and feel the difference of the heat output and observe router stability.
I discovered that as the WiFi Transmit Power is set to high, the router draws more power and generates more heat, possibly causing instability and reboot. Additionally, the Archer C1200 V3 has a newer firmware, released on 5/13/2020. Possibly ask tp-link support for firmware release for V1 and V2.
https://www.tp-link.com/us/support/download/archer-c1200/v3/#Firmware
I hope the above helps you troubleshoot the issue.
- Copy Link
- Report Inappropriate Content
Hello, sorry to respond late.
If you still encounter the auto-reboot issue, please try the below beta firmware and monitor again:
https://static.tp-link.com/2020/202001/20200103/Archer C1200(EU)_V2_180308(Beta).zip
How to upgrade it, please refer to the guide below:
https://www.tp-link.com/support/faq/2139/
Good day.
- Copy Link
- Report Inappropriate Content
@Kevin_Z Hello, I have the same model, but version V1 and I have the same issue. Can I try the FW verion also? Or can you create a fix also for version V1? Thanks a lot.
My FW version is 1.1.3 Build 20180124 rel.52299 (EU)
HW version is Archer C1200 v1.0
Martin
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 8572
Replies: 27
Voters 1