TL-WA801ND 503 Forbidden

TL-WA801ND 503 Forbidden
TL-WA801ND 503 Forbidden
2018-08-21 01:08:07
Model :

Hardware Version :

Firmware Version :

ISP :

Hello,
I bought the TP-Link AP TL-WA801ND V5 and use it with multiple SSIDs. The LAN interface is in a separate VLAN (management vlan) and the WLAN SSID (user vlan) as well. The accesspoint is connected to a router, which routes between the VLANs, So now my problem is that I cannot access the AP from the user vlan which is in the mgmt vlan. Only "503 Forbidden" is displayed. This comes definitely from the AP. There should be an option, where I can set, to allow access from other vlans on the accesspoint. I use the latest firmware. How can I solve this problem?

thank you
0
0
#1
Options
3 Reply
Re:TL-WA801ND 503 Forbidden
2018-09-26 10:36:29
I also have questions like you. Although there are many ways to go, things do not change. Look forward to the help . Thanks
0
0
#2
Options
Re:TL-WA801ND 503 Forbidden
2021-04-11 19:59:45

@khosim24h 

I have an TL-WA801N (not ND) AP with ver 6.0 and the latest firmware. It seems that the AP is not reachable from a "remote" address, i.e. through the cable if in multi ssid mode (when in single ssid mode, it works). This is true even if no VLAN is used. The only "help" in that case that you can access the AP from a WiFi connected device. If you use VLAN and the ssid(s) is(are) in a different address range, you cannot access the AP at all. It seems that the Allow remote access checkbox is not working. It seems to be the same bug for the ND and the N versions.

We would need a new firmware.

0
0
#3
Options
Re:TL-WA801ND 503 Forbidden
2021-04-25 09:09:23

@jollytall Good day, 

 

Please check my reply on your another thread, thank you: 

https://community.tp-link.com/en/home/forum/topic/260794

0
0
#4
Options