Home Network Community > DSL Modem&Routers > How to set up VLAN on TD-W8961ND and TL-WA901ND
< DSL Modem&Routers

How to set up VLAN on TD-W8961ND and TL-WA901ND

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to set up VLAN on TD-W8961ND and TL-WA901ND

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to set up VLAN on TD-W8961ND and TL-WA901ND
How to set up VLAN on TD-W8961ND and TL-WA901ND
2012-11-18 21:56:44
Region : Germany

Model : TD-W8961ND

Hardware Version : V2

Firmware Version :

ISP :

Hello,

i need to set up an Internal and Guest WLAN. Out of security reason I'd like to separate both networks with VLAN's. Therefore I bought this Router TD-W8961ND and this Access Point TL-WA901ND.

My access point has two WLAN set up:

SSID1 = AP1 -> VID 1 (Internal network)
SSID2 = AP2 -> VID 2 (Guest network)

How do i need to set up the router that both networks can use the Internet, but only AP1 can see the other internal computers?

Thanks!
File:
network.jpgDownload
router.jpgDownload
  0      
 
  0      
 
#1
Options
8 Reply
Re:How to set up VLAN on TD-W8961ND and TL-WA901ND
2012-11-19 17:56:49
Reference only： http://www.tp-link.com/en/article/?faqid=418
  0  
  0  
#2
Options
Re:How to set up VLAN on TD-W8961ND and TL-WA901ND
2012-11-19 18:08:00
"but only AP1 can see the other internal computers" Really ? I doubt that your purpose can be achieved.:D
  0  
  0  
#3
Options
Re:How to set up VLAN on TD-W8961ND and TL-WA901ND
2012-11-19 18:13:07
There are two types of VLAN as follows:
Port-Based VLAN: Each physical switch port is configured with an access list specifying membership in a set of VLANs.
ATM VLAN: Using LAN Emulation (LANE) protocol to map Ethernet packets into ATM cells and deliver them to their destination by converting an Ethernet MAC address into an ATM address.:cool:
  0  
  0  
#4
Options
Re:How to set up VLAN on TD-W8961ND and TL-WA901ND
2012-11-20 07:32:08
Hi and thanks for your answers, but i still don't understand it.

The Router does support VLAN on each Port (tagged/untagged) and the Access Point also does support VLAN.

So it should be possible to say that all traffic on Port 1 from VID1 can access all other Ports too, but all traffic from Port 1 - VID2 can only use the Internet Interface to have Internet.
  0  
  0  
#5
Options
Re:How to set up VLAN on TD-W8961ND and TL-WA901ND
2013-08-22 19:01:14
Hello guys,

I have problem when applied things below :

pvc1 --------> eth1
pvc2 ---------> eth2

Is that possible ?

If i activated vlan function, the connection drop.

Thx.
  0  
  0  
#6
Options
Re:How to set up VLAN on TD-W8961ND and TL-WA901ND
2013-08-24 15:57:19

taufik wrote

Hello guys,

I have problem when applied things below :

pvc1 --------> eth1
pvc2 ---------> eth2

Is that possible ?

If i activated vlan function, the connection drop.

Thx.

Hi.
What are the model numbers of your devices? What settings have you done?
Can you post your network topology?
  0  
  0  
#7
Options
Re:How to set up VLAN on TD-W8961ND and TL-WA901ND
2013-09-28 00:21:44

taufik wrote

Hello guys,

I have problem when applied things below :

pvc1 --------> eth1
pvc2 ---------> eth2

Is that possible ?

If i activated vlan function, the connection drop.

Thx.


I'm too interesting in VLAN howtos...
  0  
  0  
#8
Options
VLANs?
2013-09-28 00:25:50

Snowy wrote

Hi.
What are the model numbers of your devices? What settings have you done?
Can you post your network topology?


I'm too interesting, but I can't find any good configuration.
  0  
  0  
#9
Options

Information

Helpful: 0

Views: 2605

Replies: 8

About Us
Press
Copyright © TP-Link Corporation Limited. All rights reserved.