[Solution] TL-ER6020 V2 Virutal Server cannot support NAT loopback
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Modifications and Bug Fixes:
- Virtual Server cannot support NAT loopback
Products involved:
- TL-ER6020 V2 180702
Solution:
The firmware 2.0.3 has fixed the issue, please visit the TP-Link website or follow the direct link below to download the firmware.
TL-ER6020_v2_2.0.3 Build 20200623
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi All,
Recently, there is a new firmware released for the TL-ER6020 V2, which has resolved the issue.
Here is the download link for the new firmware.
https://www.tp-link.com/en/support/download/tl-er6020/#Firmware
Best Regards!
- Copy Link
- Report Inappropriate Content
Hello, i need use NAT Loopback in a TL-ER6020 V2. Nat loopback works in any firmware of this device?
there are 3 firmwares in the developers web site: https://www.tp-link.com/au/download/TL-ER6020_V2.html#Firmware
TL-ER6020(UN)_V2_20180702
TL-ER6020(UN)_V2_20180211
TL-ER6020(UN)_V2_20171222
Any of this works fine with NAT LOOPBACK??
thanks
- Copy Link
- Report Inappropriate Content
So good that you already thought of this. I registered just to report this issue and there's already a dev fix for it.
Nice job, TP-LINK.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Is there a chance we see an updated image with CVE-2020-8597 PPP bug?
- Copy Link
- Report Inappropriate Content
NAT Loopback works perfect after upgrade device with Beta Firmware.
Support answered in 14 hours after email.
Great job TP-Link!
- Copy Link
- Report Inappropriate Content
Please, can you share the Beta firmware for the TL-ER6020 V2? I Need the NAT loopback and I had no answer from the support. Thanks.
- Copy Link
- Report Inappropriate Content
Hello TP-Link, could you please send me this Beta Firmware with support for NAT Loopback?
I've already sent 3 e-mails to support requesting it, but no response so far...
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi All,
Recently, there is a new firmware released for the TL-ER6020 V2, which has resolved the issue.
Here is the download link for the new firmware.
https://www.tp-link.com/en/support/download/tl-er6020/#Firmware
Best Regards!
- Copy Link
- Report Inappropriate Content
@TP-Link So good that you already thought of this. https://roohkiawaaj.blogspot.com/ I registered just to report this issue and there's already a dev fix for it.
Nice job, TP-LINK.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 4
Views: 6610
Replies: 10
Voters 4
