TD-W8970B no PPPoE Synchronization/authentication

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TD-W8970B no PPPoE Synchronization/authentication

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TD-W8970B no PPPoE Synchronization/authentication
TD-W8970B no PPPoE Synchronization/authentication
2018-12-19 17:05:38

Hello,

i bought the device some days ago to test my internet connection. Currently i am using a "fritzbox 7312". My problem about the TP-Link is that 

i got no synchronization through PPPoe. First off all i tried several resets and did the configuration with quick start and manually. In both ways

when i have a look into my log this happen:

 

1970-01-01 01:01:50 [5] DSL: xdsl READY!!
1970-01-01 01:01:53 [5] DSL: xdsl HANDSHAKE!!
1970-01-01 01:02:04 [5] DSL: xDSL Training !!
1970-01-01 01:02:17 [5] DSL: xDSL Enter SHOWTIME!!
1970-01-01 01:02:50 [6] PPP: ppp1 sent [PADI Host-Uniq(0x000004c2)]
1970-01-01 01:02:55 [6] PPP: ppp1 sent [PADI Host-Uniq(0x000004c2)]
1970-01-01 01:03:05 [6] PPP: ppp1 sent [PADI Host-Uniq(0x000004c2)]
1970-01-01 01:03:25 [3] PPP: ppp1 Timeout waiting for PADO packets
1970-01-01 01:03:25 [3] PPP: ppp1 

 

On the other hand when i intentionally type in my access data from ISP wrong the log looks the same.

My question is where i have to look for to get the synchronization with PPPoE done.

 

Greetings Matze

 

 


 
  0      
  0      
#1
Options
1 Reply
Re:TD-W8970B no PPPoE Synchronization/authentication
2018-12-20 10:50:43

 

If the setup is correct, power off the modem, turn it back on in about 10-20 minutes. Sometimes it does sync after waiting. 

 

Double check all the info, including ppp username/password, VPI, VCI with your ISP.

 

One way to verify those info, is reset the modem, set up PPPoE on your computer. If it doesn't connect either, problem should not be on the rmodem

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options