Archer C7 5GHz SSID Not Showing
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi, just upgraded from WR-841ND to Archer C7, but I can't seem to detect the 5GHz network. The 2.4 shows up just fine, already enabled the radio, the LED for 5GHz is also on. What should I do?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi there,
All of you device cannot detect the 5G signal?
Please make sure if your device support 5G or not. Not all the device support 5G on the market.
If your device do support 5G, please try to change a Wi-Fi name for your 5G Wi-Fi, and fix the channel to channel 36 or 48.
Thanks
- Copy Link
- Report Inappropriate Content
The SSID is not detected by iPhone SE and iPhone 7 (both support 802.11ac), and they're tested right next to the antennas.
- Copy Link
- Report Inappropriate Content
try to change the low channel like the 40 .44 or the 48 band of 5Ghz since I had a similar problem with some apple devices that had a router in the 5Ghz band
- Copy Link
- Report Inappropriate Content
@meliakh i had the same problem, what should i do?
- Copy Link
- Report Inappropriate Content
Ensure that the wifi function is enabled, and try to change the wireless channel of it to verify whether it can be detected.
Good day.
- Copy Link
- Report Inappropriate Content
@meliakh same problem on my side, it was working ok, transmitting 5G, now noticed it is not.
- Copy Link
- Report Inappropriate Content
Hello, have you ever tried the troubleshooting methods mentioned above?
Please ensure that your wireless devices support 5GHz. And you can use the wifi analyzer to get the wireless channel of the 5GHz detected by your cellphone or so and change the wireless channel of 5GHz on the web UI of Archer C7.
May it help.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 7816
Replies: 7
Voters 1
