Archer C1200 V2 randomly reboots
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
When my WDR3600 died after 4 years of duty without any issues I got a C1200 V2. The newest firmware version was installed instantly via the auto update (it's the same as on the website, I checked) and it was set up properly. However, it reboots randomly - not very often, but still. I have encountered it about a dozen times during my first year of ownership now and it is really annoying. There is no heavy load on the device at all, my internet is only 20/5 Mbit and there is only one PC wired to it, and one PC / one tablet / two mobile phones via WLAN - but never at the same time, usually it's only one mobile phone using the WLAN.
I have no explanation for this and recently it rebooted while i was in an online multiplayer game, which is simply unacceptable. It just happened again today when I was lying in bed, surfing on my mobile phone like I've done thousands of times before...I don't know what's wrong with this device but I am kind of sick of it by now.
I have searched this community but I did not find anything recent about it, only with old firmwares for V1 devices. Does anybody have similar issues or even solutions?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
You can try the below beta firmware on your C1200 and confirm if the auto-reboot issue will be resolved:
https://static.tp-link.com/2019/201912/20191211/Archer C1200(US_CA_TW)_V3_180307(Beta).zip
Below is the guide to upgrade this firmware:
https://www.tp-link.com/support/faq/2139/
If it is not suggested to import the config file back into the router, you can reconfigure the address reservation manually.
- Copy Link
- Report Inappropriate Content
Hi, Thank you very much for your response.
I tried the experimental firmware. It still reboot by itself after 2 days of use.
I start my experiment on Saturday morning (4/17/2021). When I switched to use another router 9 days ago, I did not turn off the C1200 router.
When I re-connected back to the C1200 router, I found the C1200 router has NOT rebooted for the past 7 days when it was not in active use.
I loaded and used the experimental firmware since then. However, I found the C1200 with the experimental firmware rebooted about 40 minutes ago. Therefore, the experimental firmware does not resolve the reboot issue. The C1200 router is pretty much useless. I switched back to the slower router.
It appears the experimental firmware is an older version 3.04 built in 2018. It is NOT an advanced engineering build after the latest release 3.07 in 2020.
It is very unfortunate that the C1200 is buggy and kept reboot by itself. I need to start shopping around for a reliable router.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
We haven't got any update on this whether there is a new official version for the C1200 v2, if it still reboots after installing the beta firmware, please contact the local tech support to confirm if they have other suggestions on this, or they can advise on the warranty.
- Copy Link
- Report Inappropriate Content
I've found my C1200 V2.0 EU router week ago, and gave it last chance with 180308(Beta) firmware.
Disabled almost all networking options leaving only 2.4gHz network and nat boost to take advantage of my 200mbit wlan connection over wifi.
Guess what, after 2 hours router started rebooting.
Is this a hardware fault that tp-link doesn't want to admit?
None of the threads I've found on interwebz about this router mentioned that problem was solved permanently with beta version of firmware.
The worst thing is that components used in this model don't allow to use any alternative firmware.
Can I throw this thing with a clear conscience to electronic garbage can?
After all this years (3 or even 4) I don't have anymore purchase receipt, so guarantee is no more valid.
- Copy Link
- Report Inappropriate Content
Hi TP Link Support,
I'm facing the same issue as many have been facing in this thread. My router Archer C1200 v3.0 is restarting constantly every 20 mins. It is very annoying.
The led Lights go off and take about 3-5 minutes to come back to the 4 led lights. It is happening very frequently. It was working fine till last week but from this week the reboots are very frequent in a day and getting very annoying as it is disrupting my work severely.
The firmware is upto date,
Firmware version - 3.0.8 Build 20211219 Rel. 66975 (US)
I have changed the power outlet and also using a brand new tplink power adopter.
I have also changed the channel and channel width.
We don't have any other access points, we have just 5 devices attached to this and distributed across 2 bands.
I have preformed all the trouble shooting steps and still face this issue. Can you please help me on this issue.
Thanks,
Nitesh.
- Copy Link
- Report Inappropriate Content
System logs from my recent reboot
2022-02-16 20:36:10 locale[5032]: <6> 283051 Language is changed to 'en_US'
2022-02-16 20:36:10 locale[5032]: <7> 283002 Explorer language is 'en_US'
2022-02-16 20:35:56 led-controller[791]: <6> 288051 Start to run WAN1_ON
2022-02-16 20:35:56 led-controller[791]: <7> 288004 WAN1_ON is found
2022-02-16 20:35:56 led-controller[791]: <7> 288003 Led rule name is WAN1_ON
2022-02-16 20:35:56 led-controller[791]: <7> 288001 Receive data length = 132
2022-02-16 20:35:56 led-controller[791]: <6> 288051 Start to run WAN0_OFF
2022-02-16 20:35:56 led-controller[791]: <7> 288004 WAN0_OFF is found
2022-02-16 20:35:56 led-controller[791]: <7> 288003 Led rule name is WAN0_OFF
2022-02-16 20:35:56 led-controller[791]: <7> 288001 Receive data length = 132
2022-02-16 20:45:09 locale[4959]: <6> 283051 Language is changed to 'en_US'
2022-02-16 20:45:09 locale[4959]: <7> 283002 Explorer language is 'en_US'
2022-02-16 20:45:06 led-controller[792]: <6> 288051 Start to run WAN1_ON
2022-02-16 20:45:06 led-controller[792]: <7> 288004 WAN1_ON is found
2022-02-16 20:45:06 led-controller[792]: <7> 288003 Led rule name is WAN1_ON
2022-02-16 20:45:06 led-controller[792]: <7> 288001 Receive data length = 132
2022-02-16 20:45:06 led-controller[792]: <6> 288051 Start to run WAN0_OFF
2022-02-16 20:45:06 led-controller[792]: <7> 288004 WAN0_OFF is found
2022-02-16 20:45:06 led-controller[792]: <7> 288003 Led rule name is WAN0_OFF
2022-02-16 20:45:06 led-controller[792]: <7> 288001 Receive data length = 132
2022-02-16 20:44:55 locale[4742]: <6> 283051 Language is changed to 'en_US'
2022-02-16 20:44:55 locale[4742]: <7> 283002 Explorer language is 'en_US'
2022-02-16 20:44:55 locale[4728]: <6> 283051 Language is changed to 'en_US'
2022-02-16 20:44:55 locale[4728]: <7> 283002 Explorer language is 'en_US'
2022-02-16 20:44:54 locale[4695]: <6> 283051 Language is changed to 'en_US'
2022-02-16 20:44:54 locale[4695]: <7> 283002 Explorer language is 'en_US'
2022-02-16 20:44:50 upnp[4509]: <6> 217504 Service start
2022-02-16 20:44:49 upnp[4509]: <6> 217505 Service stop
2022-02-16 20:44:47 nat[3383]: <7> 211001 Flush conntrack
2022-02-16 20:44:47 nat[3383]: <6> 211021 IPSEC ALG enabled
2022-02-16 20:44:47 nat[3383]: <6> 211021 L2TP ALG enabled
2022-02-16 20:44:47 nat[3383]: <6> 211021 PPTP ALG enabled
2022-02-16 20:44:47 nat[3383]: <6> 211021 SIP ALG enabled
2022-02-16 20:44:47 nat[3383]: <6> 211021 RTSP ALG enabled
2022-02-16 20:44:47 nat[3383]: <6> 211021 H323 ALG enabled
2022-02-16 20:44:47 nat[3383]: <6> 211021 TFTP ALG enabled
2022-02-16 20:44:47 nat[3383]: <6> 211021 FTP ALG enabled
2022-02-16 20:44:45 led-controller[792]: <6> 288051 Start to run WAN1_OFF
2022-02-16 20:44:45 led-controller[792]: <7> 288004 WAN1_OFF is found
2022-02-16 20:44:45 led-controller[792]: <7> 288003 Led rule name is WAN1_OFF
2022-02-16 20:44:45 led-controller[792]: <7> 288001 Receive data length = 132
2022-02-16 20:44:45 led-controller[792]: <6> 288051 Start to run WAN0_ON
2022-02-16 20:44:45 led-controller[792]: <7> 288004 WAN0_ON is found
2022-02-16 20:44:45 led-controller[792]: <7> 288003 Led rule name is WAN0_ON
2022-02-16 20:44:45 led-controller[792]: <7> 288001 Receive data length = 132
2022-02-16 20:44:41 nat[3383]: <6> 211501 Initialization succeeded
- Copy Link
- Report Inappropriate Content
@Mr.Reese Another user here from an archer c1200 v2 randomly rebooting. I have it configured in access point mode and all WiFi bands disabled. The same is 9 days without restarting that restarts 2 or 3 times a day. I have tried the latest firmware (20211219-rel67401) and the beta, and it keeps rebooting. I don't think it's a heat or software issue. I think it's a hardware fault but tp-link will never admit it as they would face a class action lawsuit and have to pay back all the devices.
- Copy Link
- Report Inappropriate Content
@Mr.Reese I have a problem with the router on my WAN port it's turned off every 1 hour, can you help me?
This is my log from the router :
Hardware Version: Archer C1200 v3.0
Software Version: 3.0.8 Build 20211219 Rel. 66975
2022-12-14 15:23:51 locale[25469]: <6> 283051 Language is changed to 'en_US'
2022-12-14 15:23:51 locale[25469]: <7> 283002 Explorer language is 'id_ID'
2022-12-14 15:17:52 locale[20962]: <6> 283051 Language is changed to 'en_US'
2022-12-14 15:17:52 locale[20962]: <7> 283002 Explorer language is 'id_ID'
2022-12-14 15:17:38 locale[20808]: <6> 283051 Language is changed to 'en_US'
2022-12-14 15:17:38 locale[20808]: <7> 283002 Explorer language is 'id_ID'
2022-12-14 15:17:37 locale[20775]: <6> 283051 Language is changed to 'en_US'
2022-12-14 15:17:37 locale[20775]: <7> 283002 Explorer language is 'id_ID'
2022-12-14 15:17:15 imb[20421]: <6> 218507 Daemon connection succeeded
2022-12-14 15:17:14 imb[20421]: <6> 218012 ARP Binding disabled
2022-12-14 15:17:14 imb[20421]: <6> 218506 Config interface initialization succeeded
2022-12-14 15:17:14 imb[20421]: <6> 218501 Initialization succeeded
2022-12-14 15:17:05 led-controller[792]: <6> 288051 Start to run WLAN5G_ON
2022-12-14 15:17:05 led-controller[792]: <7> 288004 WLAN5G_ON is found
2022-12-14 15:17:05 led-controller[792]: <7> 288003 Led rule name is WLAN5G_ON
2022-12-14 15:17:05 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-14 15:17:05 led-controller[792]: <6> 288051 Start to run WLAN2G_ON
2022-12-14 15:17:05 led-controller[792]: <7> 288004 WLAN2G_ON is found
2022-12-14 15:17:05 led-controller[792]: <7> 288003 Led rule name is WLAN2G_ON
2022-12-14 15:17:05 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-14 15:16:58 network[19856]: <6> 290140 Set LAN, ip is 192.168.0.253, netmask is 255.255.255.0
2022-12-14 15:16:13 locale[19163]: <6> 283051 Language is changed to 'en_US'
2022-12-14 15:16:13 locale[19163]: <7> 283002 Explorer language is 'id_ID'
2022-12-14 15:16:05 locale[19059]: <6> 283051 Language is changed to 'en_US'
2022-12-14 15:16:05 locale[19059]: <7> 283002 Explorer language is 'id_ID'
2022-12-14 15:16:04 locale[19058]: <6> 283051 Language is changed to 'en_US'
2022-12-14 15:16:04 locale[19058]: <7> 283002 Explorer language is 'id_ID'
2022-12-14 15:01:02 led-controller[792]: <6> 288051 Start to run WAN1_ON
2022-12-14 15:01:02 led-controller[792]: <7> 288004 WAN1_ON is found
2022-12-14 15:01:02 led-controller[792]: <7> 288003 Led rule name is WAN1_ON
2022-12-14 15:01:02 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-14 15:01:02 led-controller[792]: <6> 288051 Start to run WAN0_OFF
2022-12-14 15:01:02 led-controller[792]: <7> 288004 WAN0_OFF is found
2022-12-14 15:01:02 led-controller[792]: <7> 288003 Led rule name is WAN0_OFF
2022-12-14 15:01:02 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-14 15:00:45 led-controller[792]: <6> 288051 Start to run WAN1_OFF
2022-12-14 15:00:45 led-controller[792]: <7> 288004 WAN1_OFF is found
2022-12-14 15:00:45 led-controller[792]: <7> 288003 Led rule name is WAN1_OFF
2022-12-14 15:00:45 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-14 15:00:45 led-controller[792]: <6> 288051 Start to run WAN0_ON
2022-12-14 15:00:45 led-controller[792]: <7> 288004 WAN0_ON is found
2022-12-14 15:00:45 led-controller[792]: <7> 288003 Led rule name is WAN0_ON
2022-12-14 15:00:45 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-14 13:00:45 led-controller[792]: <6> 288051 Start to run WAN1_ON
2022-12-14 13:00:45 led-controller[792]: <7> 288004 WAN1_ON is found
2022-12-14 13:00:45 led-controller[792]: <7> 288003 Led rule name is WAN1_ON
2022-12-14 13:00:45 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-14 13:00:45 led-controller[792]: <6> 288051 Start to run WAN0_OFF
2022-12-14 13:00:45 led-controller[792]: <7> 288004 WAN0_OFF is found
2022-12-14 13:00:45 led-controller[792]: <7> 288003 Led rule name is WAN0_OFF
2022-12-14 13:00:45 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-14 13:00:27 led-controller[792]: <6> 288051 Start to run WAN1_OFF
2022-12-14 13:00:27 led-controller[792]: <7> 288004 WAN1_OFF is found
2022-12-14 13:00:27 led-controller[792]: <7> 288003 Led rule name is WAN1_OFF
2022-12-14 13:00:27 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-14 13:00:27 led-controller[792]: <6> 288051 Start to run WAN0_ON
2022-12-14 13:00:27 led-controller[792]: <7> 288004 WAN0_ON is found
2022-12-14 13:00:27 led-controller[792]: <7> 288003 Led rule name is WAN0_ON
2022-12-14 13:00:27 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-14 11:37:02 led-controller[792]: <6> 288051 Start to run WAN1_ON
2022-12-14 11:37:02 led-controller[792]: <7> 288004 WAN1_ON is found
2022-12-14 11:37:02 led-controller[792]: <7> 288003 Led rule name is WAN1_ON
2022-12-14 11:37:02 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-14 11:37:02 led-controller[792]: <6> 288051 Start to run WAN0_OFF
2022-12-14 11:37:02 led-controller[792]: <7> 288004 WAN0_OFF is found
2022-12-14 11:37:02 led-controller[792]: <7> 288003 Led rule name is WAN0_OFF
2022-12-14 11:37:02 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-14 11:36:46 led-controller[792]: <6> 288051 Start to run WAN1_OFF
2022-12-14 11:36:46 led-controller[792]: <7> 288004 WAN1_OFF is found
2022-12-14 11:36:46 led-controller[792]: <7> 288003 Led rule name is WAN1_OFF
2022-12-14 11:36:46 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-14 11:36:45 led-controller[792]: <6> 288051 Start to run WAN0_ON
2022-12-14 11:36:45 led-controller[792]: <7> 288004 WAN0_ON is found
2022-12-14 11:36:45 led-controller[792]: <7> 288003 Led rule name is WAN0_ON
2022-12-14 11:36:45 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-14 11:01:23 led-controller[792]: <6> 288051 Start to run WAN1_ON
2022-12-14 11:01:23 led-controller[792]: <7> 288004 WAN1_ON is found
2022-12-14 11:01:23 led-controller[792]: <7> 288003 Led rule name is WAN1_ON
2022-12-14 11:01:23 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-14 11:01:23 led-controller[792]: <6> 288051 Start to run WAN0_OFF
2022-12-14 11:01:23 led-controller[792]: <7> 288004 WAN0_OFF is found
2022-12-14 11:01:23 led-controller[792]: <7> 288003 Led rule name is WAN0_OFF
2022-12-14 11:01:23 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-14 11:01:07 led-controller[792]: <6> 288051 Start to run WAN1_OFF
2022-12-14 11:01:07 led-controller[792]: <7> 288004 WAN1_OFF is found
2022-12-14 11:01:07 led-controller[792]: <7> 288003 Led rule name is WAN1_OFF
2022-12-14 11:01:07 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-14 11:01:07 led-controller[792]: <6> 288051 Start to run WAN0_ON
2022-12-14 11:01:07 led-controller[792]: <7> 288004 WAN0_ON is found
2022-12-14 11:01:07 led-controller[792]: <7> 288003 Led rule name is WAN0_ON
2022-12-14 11:01:07 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-14 09:00:50 led-controller[792]: <6> 288051 Start to run WAN1_ON
2022-12-14 09:00:50 led-controller[792]: <7> 288004 WAN1_ON is found
2022-12-14 09:00:50 led-controller[792]: <7> 288003 Led rule name is WAN1_ON
2022-12-14 09:00:50 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-14 09:00:50 led-controller[792]: <6> 288051 Start to run WAN0_OFF
2022-12-14 09:00:50 led-controller[792]: <7> 288004 WAN0_OFF is found
2022-12-14 09:00:50 led-controller[792]: <7> 288003 Led rule name is WAN0_OFF
2022-12-14 09:00:50 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-14 09:00:33 led-controller[792]: <6> 288051 Start to run WAN1_OFF
2022-12-14 09:00:33 led-controller[792]: <7> 288004 WAN1_OFF is found
2022-12-14 09:00:33 led-controller[792]: <7> 288003 Led rule name is WAN1_OFF
2022-12-14 09:00:33 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-14 09:00:32 led-controller[792]: <6> 288051 Start to run WAN0_ON
2022-12-14 09:00:32 led-controller[792]: <7> 288004 WAN0_ON is found
2022-12-14 09:00:32 led-controller[792]: <7> 288003 Led rule name is WAN0_ON
2022-12-14 09:00:32 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-13 21:00:29 led-controller[792]: <6> 288051 Start to run WAN1_ON
2022-12-13 21:00:29 led-controller[792]: <7> 288004 WAN1_ON is found
2022-12-13 21:00:29 led-controller[792]: <7> 288003 Led rule name is WAN1_ON
2022-12-13 21:00:29 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-13 21:00:29 led-controller[792]: <6> 288051 Start to run WAN0_OFF
2022-12-13 21:00:29 led-controller[792]: <7> 288004 WAN0_OFF is found
2022-12-13 21:00:29 led-controller[792]: <7> 288003 Led rule name is WAN0_OFF
2022-12-13 21:00:29 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-13 21:00:12 led-controller[792]: <6> 288051 Start to run WAN1_OFF
2022-12-13 21:00:12 led-controller[792]: <7> 288004 WAN1_OFF is found
2022-12-13 21:00:12 led-controller[792]: <7> 288003 Led rule name is WAN1_OFF
2022-12-13 21:00:12 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-13 21:00:11 led-controller[792]: <6> 288051 Start to run WAN0_ON
2022-12-13 21:00:11 led-controller[792]: <7> 288004 WAN0_ON is found
2022-12-13 21:00:11 led-controller[792]: <7> 288003 Led rule name is WAN0_ON
2022-12-13 21:00:11 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-13 17:00:31 led-controller[792]: <6> 288051 Start to run WAN1_ON
2022-12-13 17:00:31 led-controller[792]: <7> 288004 WAN1_ON is found
2022-12-13 17:00:31 led-controller[792]: <7> 288003 Led rule name is WAN1_ON
2022-12-13 17:00:31 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-13 17:00:31 led-controller[792]: <6> 288051 Start to run WAN0_OFF
2022-12-13 17:00:31 led-controller[792]: <7> 288004 WAN0_OFF is found
2022-12-13 17:00:31 led-controller[792]: <7> 288003 Led rule name is WAN0_OFF
2022-12-13 17:00:31 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-13 17:00:13 led-controller[792]: <6> 288051 Start to run WAN1_OFF
2022-12-13 17:00:13 led-controller[792]: <7> 288004 WAN1_OFF is found
2022-12-13 17:00:13 led-controller[792]: <7> 288003 Led rule name is WAN1_OFF
2022-12-13 17:00:13 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-13 17:00:13 led-controller[792]: <6> 288051 Start to run WAN0_ON
2022-12-13 17:00:13 led-controller[792]: <7> 288004 WAN0_ON is found
2022-12-13 17:00:13 led-controller[792]: <7> 288003 Led rule name is WAN0_ON
2022-12-13 17:00:13 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-13 13:00:34 led-controller[792]: <6> 288051 Start to run WAN1_ON
2022-12-13 13:00:34 led-controller[792]: <7> 288004 WAN1_ON is found
2022-12-13 13:00:34 led-controller[792]: <7> 288003 Led rule name is WAN1_ON
2022-12-13 13:00:34 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-13 13:00:34 led-controller[792]: <6> 288051 Start to run WAN0_OFF
2022-12-13 13:00:34 led-controller[792]: <7> 288004 WAN0_OFF is found
2022-12-13 13:00:34 led-controller[792]: <7> 288003 Led rule name is WAN0_OFF
2022-12-13 13:00:34 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-13 13:00:16 led-controller[792]: <6> 288051 Start to run WAN1_OFF
2022-12-13 13:00:16 led-controller[792]: <7> 288004 WAN1_OFF is found
2022-12-13 13:00:16 led-controller[792]: <7> 288003 Led rule name is WAN1_OFF
2022-12-13 13:00:16 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-13 13:00:16 led-controller[792]: <6> 288051 Start to run WAN0_ON
2022-12-13 13:00:16 led-controller[792]: <7> 288004 WAN0_ON is found
2022-12-13 13:00:16 led-controller[792]: <7> 288003 Led rule name is WAN0_ON
2022-12-13 13:00:16 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-13 11:00:55 led-controller[792]: <6> 288051 Start to run WAN1_ON
2022-12-13 11:00:55 led-controller[792]: <7> 288004 WAN1_ON is found
2022-12-13 11:00:55 led-controller[792]: <7> 288003 Led rule name is WAN1_ON
2022-12-13 11:00:55 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-13 11:00:55 led-controller[792]: <6> 288051 Start to run WAN0_OFF
2022-12-13 11:00:55 led-controller[792]: <7> 288004 WAN0_OFF is found
2022-12-13 11:00:55 led-controller[792]: <7> 288003 Led rule name is WAN0_OFF
2022-12-13 11:00:55 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-13 11:00:18 led-controller[792]: <6> 288051 Start to run WAN1_OFF
2022-12-13 11:00:18 led-controller[792]: <7> 288004 WAN1_OFF is found
2022-12-13 11:00:18 led-controller[792]: <7> 288003 Led rule name is WAN1_OFF
2022-12-13 11:00:18 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-13 11:00:18 led-controller[792]: <6> 288051 Start to run WAN0_ON
2022-12-13 11:00:18 led-controller[792]: <7> 288004 WAN0_ON is found
2022-12-13 11:00:18 led-controller[792]: <7> 288003 Led rule name is WAN0_ON
2022-12-13 11:00:18 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-13 09:47:39 led-controller[792]: <6> 288051 Start to run WAN1_ON
2022-12-13 09:47:39 led-controller[792]: <7> 288004 WAN1_ON is found
2022-12-13 09:47:39 led-controller[792]: <7> 288003 Led rule name is WAN1_ON
2022-12-13 09:47:39 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-13 09:47:39 led-controller[792]: <6> 288051 Start to run WAN0_OFF
2022-12-13 09:47:39 led-controller[792]: <7> 288004 WAN0_OFF is found
2022-12-13 09:47:39 led-controller[792]: <7> 288003 Led rule name is WAN0_OFF
2022-12-13 09:47:39 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-13 09:47:23 led-controller[792]: <6> 288051 Start to run WAN1_OFF
2022-12-13 09:47:23 led-controller[792]: <7> 288004 WAN1_OFF is found
2022-12-13 09:47:23 led-controller[792]: <7> 288003 Led rule name is WAN1_OFF
2022-12-13 09:47:23 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-13 09:47:22 led-controller[792]: <6> 288051 Start to run WAN0_ON
2022-12-13 09:47:22 led-controller[792]: <7> 288004 WAN0_ON is found
2022-12-13 09:47:22 led-controller[792]: <7> 288003 Led rule name is WAN0_ON
2022-12-13 09:47:22 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-13 09:01:47 led-controller[792]: <6> 288051 Start to run WAN1_ON
2022-12-13 09:01:47 led-controller[792]: <7> 288004 WAN1_ON is found
2022-12-13 09:01:47 led-controller[792]: <7> 288003 Led rule name is WAN1_ON
2022-12-13 09:01:47 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-13 09:01:47 led-controller[792]: <6> 288051 Start to run WAN0_OFF
2022-12-13 09:01:47 led-controller[792]: <7> 288004 WAN0_OFF is found
2022-12-13 09:01:47 led-controller[792]: <7> 288003 Led rule name is WAN0_OFF
2022-12-13 09:01:47 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-13 09:01:31 led-controller[792]: <6> 288051 Start to run WAN1_OFF
2022-12-13 09:01:31 led-controller[792]: <7> 288004 WAN1_OFF is found
2022-12-13 09:01:31 led-controller[792]: <7> 288003 Led rule name is WAN1_OFF
2022-12-13 09:01:31 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-13 09:01:31 led-controller[792]: <6> 288051 Start to run WAN0_ON
2022-12-13 09:01:31 led-controller[792]: <7> 288004 WAN0_ON is found
2022-12-13 09:01:31 led-controller[792]: <7> 288003 Led rule name is WAN0_ON
2022-12-13 09:01:31 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-13 09:00:54 led-controller[792]: <6> 288051 Start to run WAN1_ON
2022-12-13 09:00:54 led-controller[792]: <7> 288004 WAN1_ON is found
2022-12-13 09:00:54 led-controller[792]: <7> 288003 Led rule name is WAN1_ON
2022-12-13 09:00:54 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-13 09:00:54 led-controller[792]: <6> 288051 Start to run WAN0_OFF
2022-12-13 09:00:54 led-controller[792]: <7> 288004 WAN0_OFF is found
2022-12-13 09:00:54 led-controller[792]: <7> 288003 Led rule name is WAN0_OFF
2022-12-13 09:00:54 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-13 09:00:17 led-controller[792]: <6> 288051 Start to run WAN1_OFF
2022-12-13 09:00:17 led-controller[792]: <7> 288004 WAN1_OFF is found
2022-12-13 09:00:17 led-controller[792]: <7> 288003 Led rule name is WAN1_OFF
2022-12-13 09:00:17 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-13 09:00:17 led-controller[792]: <6> 288051 Start to run WAN0_ON
2022-12-13 09:00:17 led-controller[792]: <7> 288004 WAN0_ON is found
2022-12-13 09:00:17 led-controller[792]: <7> 288003 Led rule name is WAN0_ON
2022-12-13 09:00:17 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-12 19:01:03 led-controller[792]: <6> 288051 Start to run WAN1_ON
2022-12-12 19:01:03 led-controller[792]: <7> 288004 WAN1_ON is found
2022-12-12 19:01:03 led-controller[792]: <7> 288003 Led rule name is WAN1_ON
2022-12-12 19:01:03 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-12 19:01:03 led-controller[792]: <6> 288051 Start to run WAN0_OFF
2022-12-12 19:01:03 led-controller[792]: <7> 288004 WAN0_OFF is found
2022-12-12 19:01:03 led-controller[792]: <7> 288003 Led rule name is WAN0_OFF
2022-12-12 19:01:03 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-12 19:00:45 led-controller[792]: <6> 288051 Start to run WAN1_OFF
2022-12-12 19:00:45 led-controller[792]: <7> 288004 WAN1_OFF is found
2022-12-12 19:00:45 led-controller[792]: <7> 288003 Led rule name is WAN1_OFF
2022-12-12 19:00:45 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-12 19:00:45 led-controller[792]: <6> 288051 Start to run WAN0_ON
2022-12-12 19:00:45 led-controller[792]: <7> 288004 WAN0_ON is found
2022-12-12 19:00:45 led-controller[792]: <7> 288003 Led rule name is WAN0_ON
2022-12-12 19:00:45 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-12 17:06:36 led-controller[792]: <6> 288051 Start to run WAN1_ON
2022-12-12 17:06:36 led-controller[792]: <7> 288004 WAN1_ON is found
2022-12-12 17:06:36 led-controller[792]: <7> 288003 Led rule name is WAN1_ON
2022-12-12 17:06:36 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-12 17:06:36 led-controller[792]: <6> 288051 Start to run WAN0_OFF
2022-12-12 17:06:36 led-controller[792]: <7> 288004 WAN0_OFF is found
2022-12-12 17:06:36 led-controller[792]: <7> 288003 Led rule name is WAN0_OFF
2022-12-12 17:06:36 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-12 17:06:19 led-controller[792]: <6> 288051 Start to run WAN1_OFF
2022-12-12 17:06:19 led-controller[792]: <7> 288004 WAN1_OFF is found
2022-12-12 17:06:19 led-controller[792]: <7> 288003 Led rule name is WAN1_OFF
2022-12-12 17:06:19 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-12 17:06:19 led-controller[792]: <6> 288051 Start to run WAN0_ON
2022-12-12 17:06:19 led-controller[792]: <7> 288004 WAN0_ON is found
2022-12-12 17:06:19 led-controller[792]: <7> 288003 Led rule name is WAN0_ON
2022-12-12 17:06:19 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-12 17:00:35 led-controller[792]: <6> 288051 Start to run WAN1_ON
2022-12-12 17:00:35 led-controller[792]: <7> 288004 WAN1_ON is found
2022-12-12 17:00:35 led-controller[792]: <7> 288003 Led rule name is WAN1_ON
2022-12-12 17:00:35 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-12 17:00:35 led-controller[792]: <6> 288051 Start to run WAN0_OFF
2022-12-12 17:00:35 led-controller[792]: <7> 288004 WAN0_OFF is found
2022-12-12 17:00:35 led-controller[792]: <7> 288003 Led rule name is WAN0_OFF
2022-12-12 17:00:35 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-12 17:00:17 led-controller[792]: <6> 288051 Start to run WAN1_OFF
2022-12-12 17:00:17 led-controller[792]: <7> 288004 WAN1_OFF is found
2022-12-12 17:00:17 led-controller[792]: <7> 288003 Led rule name is WAN1_OFF
2022-12-12 17:00:17 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-12 17:00:17 led-controller[792]: <6> 288051 Start to run WAN0_ON
2022-12-12 17:00:17 led-controller[792]: <7> 288004 WAN0_ON is found
2022-12-12 17:00:17 led-controller[792]: <7> 288003 Led rule name is WAN0_ON
2022-12-12 17:00:17 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-12 15:01:01 led-controller[792]: <6> 288051 Start to run WAN1_ON
2022-12-12 15:01:01 led-controller[792]: <7> 288004 WAN1_ON is found
2022-12-12 15:01:01 led-controller[792]: <7> 288003 Led rule name is WAN1_ON
2022-12-12 15:01:01 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-12 15:01:01 led-controller[792]: <6> 288051 Start to run WAN0_OFF
2022-12-12 15:01:01 led-controller[792]: <7> 288004 WAN0_OFF is found
2022-12-12 15:01:01 led-controller[792]: <7> 288003 Led rule name is WAN0_OFF
2022-12-12 15:01:01 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-12 15:00:45 led-controller[792]: <6> 288051 Start to run WAN1_OFF
2022-12-12 15:00:45 led-controller[792]: <7> 288004 WAN1_OFF is found
2022-12-12 15:00:45 led-controller[792]: <7> 288003 Led rule name is WAN1_OFF
2022-12-12 15:00:45 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-12 15:00:45 led-controller[792]: <6> 288051 Start to run WAN0_ON
2022-12-12 15:00:45 led-controller[792]: <7> 288004 WAN0_ON is found
2022-12-12 15:00:45 led-controller[792]: <7> 288003 Led rule name is WAN0_ON
2022-12-12 15:00:45 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-12 13:42:03 led-controller[792]: <6> 288051 Start to run WAN1_ON
2022-12-12 13:42:03 led-controller[792]: <7> 288004 WAN1_ON is found
2022-12-12 13:42:03 led-controller[792]: <7> 288003 Led rule name is WAN1_ON
2022-12-12 13:42:03 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-12 13:42:03 led-controller[792]: <6> 288051 Start to run WAN0_OFF
2022-12-12 13:42:03 led-controller[792]: <7> 288004 WAN0_OFF is found
2022-12-12 13:42:03 led-controller[792]: <7> 288003 Led rule name is WAN0_OFF
2022-12-12 13:42:03 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-12 13:41:44 led-controller[792]: <6> 288051 Start to run WAN1_OFF
2022-12-12 13:41:44 led-controller[792]: <7> 288004 WAN1_OFF is found
2022-12-12 13:41:44 led-controller[792]: <7> 288003 Led rule name is WAN1_OFF
2022-12-12 13:41:44 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-12 13:41:44 led-controller[792]: <6> 288051 Start to run WAN0_ON
2022-12-12 13:41:44 led-controller[792]: <7> 288004 WAN0_ON is found
2022-12-12 13:41:44 led-controller[792]: <7> 288003 Led rule name is WAN0_ON
2022-12-12 13:41:44 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-12 13:01:02 led-controller[792]: <6> 288051 Start to run WAN1_ON
2022-12-12 13:01:02 led-controller[792]: <7> 288004 WAN1_ON is found
2022-12-12 13:01:02 led-controller[792]: <7> 288003 Led rule name is WAN1_ON
2022-12-12 13:01:02 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-12 13:01:02 led-controller[792]: <6> 288051 Start to run WAN0_OFF
2022-12-12 13:01:02 led-controller[792]: <7> 288004 WAN0_OFF is found
2022-12-12 13:01:02 led-controller[792]: <7> 288003 Led rule name is WAN0_OFF
2022-12-12 13:01:02 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-12 13:00:08 led-controller[792]: <6> 288051 Start to run WAN1_OFF
2022-12-12 13:00:08 led-controller[792]: <7> 288004 WAN1_OFF is found
2022-12-12 13:00:08 led-controller[792]: <7> 288003 Led rule name is WAN1_OFF
2022-12-12 13:00:08 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-12 13:00:08 led-controller[792]: <6> 288051 Start to run WAN0_ON
2022-12-12 13:00:08 led-controller[792]: <7> 288004 WAN0_ON is found
2022-12-12 13:00:08 led-controller[792]: <7> 288003 Led rule name is WAN0_ON
2022-12-12 13:00:08 led-controller[792]: <7> 288001 Receive data length = 132
2022-12-12 11:46:49 locale[17851]: <6> 283051 Language is changed to 'en_US'
2022-12-12 11:46:49 locale[17851]: <7> 283002 Explorer language is 'en_US'
2022-12-12 11:46:48 locale[17850]: <6> 283051 Language is changed to 'en_US'
2022-12-12 11:46:48 locale[17850]: <7> 283002 Explorer language is 'en_US'
2022-12-12 11:30:56 locale[6055]: <6> 283051 Language is changed to 'en_US'
2022-12-12 11:30:56 locale[6055]: <7> 283002 Explorer language is 'en_US'
2022-12-12 11:30:28 locale[5697]: <6> 283051 Language is changed to 'en_US'
2022-12-12 11:30:28 locale[5697]: <7> 283002 Explorer language is 'en_US'
2022-12-12 11:30:27 locale[5696]: <6> 283051 Language is changed to 'en_US'
2022-12-12 11:30:27 locale[5696]: <7> 283002 Explorer language is 'en_US'
2022-12-12 11:30:26 locale[5668]: <6> 283051 Language is changed to 'en_US'
2022-12-12 11:30:26 locale[5668]: <7> 283002 Explorer language is 'en_US'
2022-12-12 11:30:11 locale[5473]: <6> 283051 Language is changed to 'en_US'
2022-12-12 11:30:11 locale[5473]: <7> 283002 Explorer language is 'en_US'
2022-12-12 11:30:10 locale[5453]: <6> 283051 Language is changed to 'en_US'
2022-12-12 11:30:10 locale[5453]: <7> 283002 Explorer language is 'en_US'
2017-01-01 00:01:12 led-controller[792]: <6> 288051 Start to run WAN1_ON
2017-01-01 00:01:12 led-controller[792]: <7> 288004 WAN1_ON is found
2017-01-01 00:01:12 led-controller[792]: <7> 288003 Led rule name is WAN1_ON
2017-01-01 00:01:12 led-controller[792]: <7> 288001 Receive data length = 132
2017-01-01 00:01:12 led-controller[792]: <6> 288051 Start to run WAN0_OFF
2017-01-01 00:01:12 led-controller[792]: <7> 288004 WAN0_OFF is found
2017-01-01 00:01:12 led-controller[792]: <7> 288003 Led rule name is WAN0_OFF
2017-01-01 00:01:12 led-controller[792]: <7> 288001 Receive data length = 132
2017-01-01 00:00:56 led-controller[792]: <6> 288051 Start to run WAN1_OFF
2017-01-01 00:00:56 led-controller[792]: <7> 288004 WAN1_OFF is found
2017-01-01 00:00:56 led-controller[792]: <7> 288003 Led rule name is WAN1_OFF
2017-01-01 00:00:56 led-controller[792]: <7> 288001 Receive data length = 132
2017-01-01 00:00:56 led-controller[792]: <6> 288051 Start to run WAN0_ON
2017-01-01 00:00:56 led-controller[792]: <7> 288004 WAN0_ON is found
2017-01-01 00:00:56 led-controller[792]: <7> 288003 Led rule name is WAN0_ON
2017-01-01 00:00:56 led-controller[792]: <7> 288001 Receive data length = 132
2017-01-01 00:00:56 led-controller[792]: <6> 288051 Start to run WLAN5G_ON
2017-01-01 00:00:56 led-controller[792]: <7> 288004 WLAN5G_ON is found
2017-01-01 00:00:56 led-controller[792]: <7> 288003 Led rule name is WLAN5G_ON
2017-01-01 00:00:56 led-controller[792]: <7> 288001 Receive data length = 132
2017-01-01 00:00:56 led-controller[792]: <6> 288051 Start to run WLAN2G_ON
2017-01-01 00:00:56 led-controller[792]: <7> 288004 WLAN2G_ON is found
2017-01-01 00:00:56 led-controller[792]: <7> 288003 Led rule name is WLAN2G_ON
2017-01-01 00:00:56 led-controller[792]: <7> 288001 Receive data length = 132
2017-01-01 00:00:51 qos[3852]: <6> 259504 Service start
2017-01-01 00:00:51 qos[3852]: <6> 259503 Function disabled
2017-01-01 00:00:47 led-controller[792]: <6> 288051 Start to run NIGHT
2017-01-01 00:00:47 led-controller[792]: <7> 288004 NIGHT is found
2017-01-01 00:00:47 led-controller[792]: <7> 288003 Led rule name is NIGHT
2017-01-01 00:00:47 led-controller[792]: <7> 288001 Receive data length = 132
2017-01-01 00:00:47 led-controller[792]: <6> 288051 Start to run GENERAL
2017-01-01 00:00:47 led-controller[792]: <6> 288051 Start to run Gernal on
2017-01-01 00:00:47 led-controller[792]: <7> 288004 GENERAL is found
2017-01-01 00:00:47 led-controller[792]: <7> 288003 Led rule name is GENERAL
2017-01-01 00:00:47 led-controller[792]: <7> 288001 Receive data length = 132
2017-01-01 00:00:46 led-controller[792]: <6> 288051 Start to run STATUS_ON
2017-01-01 00:00:46 led-controller[792]: <7> 288004 STATUS_ON is found
2017-01-01 00:00:46 led-controller[792]: <7> 288003 Led rule name is STATUS_ON
2017-01-01 00:00:46 led-controller[792]: <7> 288001 Receive data length = 132
2017-01-01 00:00:36 factory-reset[3251]: <6> 284504 Service start
2017-01-01 00:00:36 parental-control[3209]: <6> 229504 Service start
2017-01-01 00:00:35 parental-control[3209]: <5> 229606 Flush conntrack table succeeded
2017-01-01 00:00:35 parental-control[3209]: <6> 229503 Function disabled
2017-01-01 00:00:35 access-control[3178]: <6> 239504 Service start
2017-01-01 00:00:35 access-control[3178]: <5> 239606 Flush conntrack table succeeded
2017-01-01 00:00:35 access-control[3178]: <6> 239503 Function disabled
2017-01-01 00:00:35 nat[2524]: <7> 211001 Flush conntrack
2017-01-01 00:00:35 nat[2524]: <6> 211021 IPSEC ALG enabled
2017-01-01 00:00:35 nat[2524]: <6> 211021 L2TP ALG enabled
2017-01-01 00:00:34 nat[2524]: <6> 211021 PPTP ALG enabled
2017-01-01 00:00:34 nat[2524]: <6> 211021 SIP ALG enabled
2017-01-01 00:00:34 nat[2524]: <6> 211021 RTSP ALG enabled
2017-01-01 00:00:34 nat[2524]: <6> 211021 H323 ALG enabled
2017-01-01 00:00:34 nat[2524]: <6> 211021 TFTP ALG enabled
2017-01-01 00:00:34 nat[2524]: <6> 211021 FTP ALG enabled
2017-01-01 00:00:28 nat[2524]: <6> 211502 Function enabled
2017-01-01 00:00:27 nat[2524]: <5> 211051 Create NAT chain succeeded
2017-01-01 00:00:26 nat[2524]: <6> 211501 Initialization succeeded
2017-01-01 00:00:25 nat[2524]: <6> 211501 Initialization succeeded
2017-01-01 00:00:23 basic-security[2297]: <6> 219504 Service start
2017-01-01 00:00:23 basic-security[2297]: <5> 219606 Flush conntrack table succeeded
2017-01-01 00:00:21 firewall[1569]: <6> 209504 Service start
2017-01-01 00:00:14 imb[1863]: <6> 218507 Daemon connection succeeded
2017-01-01 00:00:14 imb[1863]: <6> 218012 ARP Binding disabled
2017-01-01 00:00:14 imb[1863]: <6> 218506 Config interface initialization succeeded
2017-01-01 00:00:14 imb[1863]: <6> 218501 Initialization succeeded
2017-01-01 00:00:12 upnp[1698]: <6> 217504 Service start
2017-01-01 00:00:11 upnp[1698]: <6> 217505 Service stop
2017-01-01 00:00:05 modem[981]: <7> 292036 backup: switch network to WIRED.
2017-01-01 00:00:00 led-controller[792]: <6> 288051 Start to run STATUS_SAN
2017-01-01 00:00:00 led-controller[792]: <7> 288004 STATUS_SAN is found
2017-01-01 00:00:00 led-controller[792]: <7> 288003 Led rule name is STATUS_SAN
2017-01-01 00:00:00 led-controller[792]: <7> 288001 Receive data length = 132
1970-01-01 00:00:12 led-controller[792]: <6> 288504 Service start
1970-01-01 00:00:12 led-controller[792]: <7> 288002 Adding led WLAN5G
1970-01-01 00:00:12 led-controller[792]: <7> 288002 Adding led WLAN2G
1970-01-01 00:00:12 led-controller[792]: <7> 288002 Adding led STATUS
1970-01-01 00:00:12 led-controller[792]: <7> 288002 Adding led WAN2
1970-01-01 00:00:12 led-controller[792]: <7> 288002 Adding led WAN1
1970-01-01 00:00:12 led-controller[792]: <7> 288002 Adding led USB1
1970-01-01 00:00:12 led-controller[792]: <7> 288002 Adding led LAN4
1970-01-01 00:00:12 led-controller[792]: <7> 288002 Adding led LAN3
1970-01-01 00:00:12 led-controller[792]: <7> 288002 Adding led LAN2
1970-01-01 00:00:12 led-controller[792]: <7> 288002 Adding led LAN1
2022-11-18 11:09:22 network[26101]: <4> 290702 Invalid arguments from webpages
2022-11-18 11:08:03 network[23817]: <4> 290702 Invalid arguments from webpages
2022-11-18 10:55:22 network[13836]: <4> 290702 Invalid arguments from webpages
- Copy Link
- Report Inappropriate Content
@klarsmile Forget you'll get any help here. Problem exist since day 1, last firmware update that was aimed at resolving the problem came out in 2018 and till now nothing has been done.
If you can return it or replace, do it. Otherwise get used to frequent restarts and disconnects, and don't recommend TP-Link to any of your friends anymore. Just look at how many topics there are on this forum about frequent router restarts of many other models, all left hanging without any answers for years. After 3 faulty routers that stopped working properly or died in less than 2 years of use I no longer trust TP-Link.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 23457
Replies: 61
Voters 0
No one has voted for it yet.