My Archer T2U Dual Band does not connect to 5 ghz Network after windows update.
My computer got an Windows Update. Now, I am no longer able to connect to my 5G network. I CAN, however, connect to the 2.4G network just fine. went ahead and updated to the latest drivers from your site, but to no avail. When i try to connect to the 5 ghz one, the adapter shuts down.I even called to Technical Support and they tryed everything and still nothing..
I also tried to roll back the driver to the previous version, but this didn't work either.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Something new? I just go a new one same type. Same problem
- Copy Link
- Report Inappropriate Content
Hi,
Our engineer has contacted you, if you are willing to do further troubleshooting, please notice your inbox.
Have a nice day.
Victor01 wrote
Something new? I just go a new one same type. Same problem
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
i had the same issue my adapter was not able to detect the 5Ghz network, so i tried unistalling and reinstalling the latest update from the tp-link website but this time when i was trying to install the installer says ( Not able to detect the device where as my device is connected to the Laptop) and i am getting 2.4 ghz band from it
- Copy Link
- Report Inappropriate Content
Hi,
Our engineer has contacted you, if you are willing to do further troubleshooting, please notice your inbox.
Have a nice day.
Jakub_B wrote
Hello, something new? Maybe new driver? Still the same problem :(
- Copy Link
- Report Inappropriate Content
Hi,
What is the model number of your network adapter? Is it Archer T2U?
It is suggested to change the wireless channel of 5GHz, like channel 36, 40 or 44. After that, please test whether the computer can detect 5GHz network.
Meanwhile, you can try to install the driver below to give it a go.
http://support.tp-link.com/f/2e8d04c5fd/?dl=1
Any updates, please let us know.
Have a nice day.
Siddharth.D wrote
i had the same issue my adapter was not able to detect the 5Ghz network, so i tried unistalling and reinstalling the latest update from the tp-link website but this time when i was trying to install the installer says ( Not able to detect the device where as my device is connected to the Laptop) and i am getting 2.4 ghz band from it
- Copy Link
- Report Inappropriate Content
Kindly relesse a new update with all the issues fixed its been almost 5 Months you dont have a update for T2U Archer in India. I have seen many friends facing the issues of 5GHz band
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi,
Sorry for the trouble caused, our engineer is working on it now but no solution yet.
Would you please provide more details to help us to locate the issue.
1. What is the model number of your router?
2. Who is your internet service provider?
3. Do you have the same issue with other devices?
Besides, please contact the tech support of the router to check whether there is a new firmware can be updated.
If possible, please use another 5GHz network to do a comparison test.
Thanks in advance, and have a nice day.
Siddharth.D wrote
Hi my adapter is a T2U Archer AC600,Thanks for the reply Kevin but the link you gave me didn't help i have tried to change the wireless channel to the once given by you but didnt help.....
- Copy Link
- Report Inappropriate Content
Hi,
My Adapter: Archer T2U(EU) Ver 2.0, bought yesterday. I specifically bought it for the Dual Band!
Windows 10 Home 64bit
I see all networks. I can connect to the 2.4 GHz within seconds.
When trying to connect to 5GHz it seems to reboot the adapter before it is connecting. Not connecting at all.
- I tried configuring the Adapter in the device Manager first
- I used multiple USB Ports
- I tried all the software you already linked in this thread.
- I switched the network from a/n/ac to ac and back
- I reduced bandwidth to 20 MHz and reset it later
- I tried channels 36, 40 and 44
- I tried multiple configurations of the above
- I uninstalled and retried everything AGAIN
3 Hours later: still no connection possible to the 5GHz network!
If I cannot use this as advertised, this will be returned and reviewed accordingly.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 42897
Replies: 60
Voters 0
No one has voted for it yet.