2.4ghz lost connection, 5ghz still working
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I lost my 2.4ghz connection while the 5ghz still working, the strange thing is my 2.4ghz extension still working. Anyone can help? Thanks.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @Kevin_Z ,
I understand, I dont need this feature urgently but my problem is the same at all, the wireless 2.4Ghz Stop responding and only the 5Ghz work. I am only at 3 meters of th router. If I turn off radio and turn on, I can work until the problem apper again.
Archer C60 v3.0
1.2.1 Build 20210309 rel.46035(4252)
Thank´s
- Copy Link
- Report Inappropriate Content
If the model is C60, I guess it doesn't support Onemesh yet. May I know how did you find that it broadcast four networks? Have you enabled the Guest Network on the router?
Back to the 2.4G not responding issue, can you please confirm if you can still see the network on the devices? Or is the Wi-Fi LED still flashing? Try to reset the router to factory default via the web GUI, check the Method 2 in the below article:
https://www.tp-link.com/support/faq/497/
If the reset doesn't help, please try to install and run the Wi-Fi analyzer to find a clear channel for the 2.4G network, then change the 2.4G channel width to 20MHz, change the security to WPA2-PSK/AES, reboot the router and reconnect to the wireless network, then confirm.
- Copy Link
- Report Inappropriate Content
Hi @Kevin_Z ,
Yes, I am using Archer C60 v3.0 1.2.1 Build 20210309 rel.46035(4252).
May I know how did you find that it broadcast four networks? Have you enabled the Guest Network on the router?
Resp: Five! SSID´s and yes, I have one Guest Network enabled. I already changed channel´s and type of cryptography without results. I tried to working for a time with these alterations but the problem appear again
I am using Wifi Explorer for Mac to find networks.
Thank´s
- Copy Link
- Report Inappropriate Content
I see. It seems that your C60 is a BR version, I just noticed that it does support Onemesh already.
As for the 2.4G not responding issue, have you tried my previous suggestions, do they help?
- Copy Link
- Report Inappropriate Content
Hi @Kevin_Z ,
Yes, my version is BR, about problem with 2.4Ghz, yes, I tried the configurations without result´s. I tried to change channel two times and change cryptography, again without result´s. In the aleatory time, I lost 2.4Ghz.
In the image if you see, I have 5 Five networks with my configurations. According to his explanation it would be the Mesh network.
TP-LINK_DF7924 - 5 Ghz - My Corporate network 5 Ghz
TP-LINK_DF7924 - 2.4 Ghz - My Corporate network 2.4 Ghz
Hidden Network - 5 Ghz - Mesh Network ?!?!
CCATHARINA - 2.4 Ghz - My Guest network 2.4 Ghz
Hidden Network - 2.4 Ghz - Mesh Network Guest ?!?!
Thank´s.
Ricardo.
- Copy Link
- Report Inappropriate Content
Thank you very much for the investigation. As we previously replied, the hidden networks are used to build up the Onemesh wireless network with the Onemesh range extenders, and this will be optimized in the future firmware update, there will be an option to disable it.
Back to the 2.4G not responding issue, do any of the devices can see it or connect to it when it is not responding? Are they able to obtaining IP address from the router?
How many devices connect to the 2.4G network, are they all experiencing an issue when the issue happens?
- Copy Link
- Report Inappropriate Content
Hi @Kevin_Z ,
Newest tests, when I lose 2.4Ghz signal, I lose in two devices, one cellular Motorola and one printer Canon g3111, in the Motorola I can see the 2.4Ghz signal but if I try to connect after lost, I connect and I am disconnected automatically. In the printer Canon I cant do this. When these occurs I need to power off router or access it and use the option to power off wifi signal and power on again in Wireless Menu. After this I am able to connect again.
Another thing caught my attention, if I switch to channel 11, the Canon printer is not able to connect any more.
Thank´s
Ricardo.
- Copy Link
- Report Inappropriate Content
To locate this issue and try to fix it, we would like to follow up on your case via email. Please check your inbox and provide the information that we need.
- Copy Link
- Report Inappropriate Content
@Kevin_Z link doesn't work
Kevin_Z wrote
Hi,
What do you mean you lost the 2.4GHz network? More specific symptom will be better.
Meanwhile, what is the current wifi leds? Especially the 2.4GHz one.
Is the status of 2.4GHz normal? You can confirm it on the web interface of the router.
https://www.tp-link.com/en/support/faq/1523/ <<<<<<<<<<<<<<<<<<<<<<<<<
Besides, did you try to power cycle the router, disable and re-enable the wifi function to give it a go?
Good day.
- Copy Link
- Report Inappropriate Content
Thank you for reminding. You can visit this one: https://www.tp-link.com/support/faq/87/.
BTW, do you also experience an issue with the 2.4G connection? It's suggested to follow the troubleshooting suggestions in the below article to see if it will be fixed:
Troubleshooting: Unstable wireless connection on TP-Link router
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 46938
Replies: 90
Voters 0
No one has voted for it yet.