How to config 4G Router when use router mode
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi
pls help me to config 4G router Archer MR200
I want to:
I want to set up the router to use the office network. Where the router will distribute the IP address itself
For example Network network office 10.113.10.xx Router give ip to client 192.168.1.xx
Now I set the client to be able to get the ipaddress set 192.168.1.xx. already.
But the client cannot go out to find a network office
I want to know how to configure the router.
thanks in advance for you help.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I didn't get that. Maybe you could explain yourself one more time.
- Copy Link
- Report Inappropriate Content
sorry for my above message.
I want to set up the router to use the office network. Where the router will distribute the IP address itself
For example
Network network office 10.113.10.xx Router give ip to client 192.168.1.xx
Now I set the client to be able to get the ipaddress set 192.168.1.xx. already.
But the client cannot go out to find a network office
I want to know how to configure the router.
- Copy Link
- Report Inappropriate Content
If I didn't get you wrong, you just want to get Internet from your office router via MR200, right? Then MR200 shares the Internet?
If so, please reset your MR200 and set it to work on Router Mode. Then connect your office router to MR200(EWAN port) via Ethernet cable. Then MR200 will configure automatically.
Just wait a few minutes. It should work.
- Copy Link
- Report Inappropriate Content
Hello,
To connect the MR200 to the existing network, please change the operation mode to wireless router mode.
Note: You can refer to https://www.tp-link.com/en/support/faq/1656/ to login to the web interface first. And then go to advanced-operation mode to change it.
Then you can configure it with the info given by ISP. If you can get internet directly from the internet source, the MR200 should be plug and play.
And then the MR200 will work as a DHCP server and it will assign IP addresses for the devices which connected to it.
May it help and have a nice day.
Jay-T wrote
Hi
pls help me to config 4G router Archer MR200
I want to:
I want to set up the router to use the office network. Where the router will distribute the IP address itself
For example Network network office 10.113.10.xx Router give ip to client 192.168.1.xx
Now I set the client to be able to get the ipaddress set 192.168.1.xx. already.
But the client cannot go out to find a network office
I want to know how to configure the router.
thanks in advance for you help.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1879
Replies: 4
Voters 0
No one has voted for it yet.