How to set RE450 V2.0 system time?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

How to set RE450 V2.0 system time?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to set RE450 V2.0 system time?
How to set RE450 V2.0 system time?
2019-04-22 13:26:19 - last edited 2020-01-10 07:04:44
Model: RE450  
Hardware Version: V2
Firmware Version: 1.0.4

How to i set the time manually for RE450 in webUI? it's currently the wrong date/time.

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Re:Re:Re:Re:How to set RE450 V2.0 system time?-Solution
2020-01-09 06:38:52 - last edited 2020-01-10 07:04:44

@Markus99 

 

Hello, try to reboot the RE450; and then please check whether the time shows right one after it booted up. 

 

If still the same, please hard reset it first by holding the reset hole for 1s with the RE450 powered on.

 

Then please login to the web UI and show us a screenshot of the time settings page. 

 

After that, you can reconfigure the RE450 with the main router's wifi and verify whether the time get corrected once it is connected to internet. 

 

Good day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#8
Options
16 Reply
Re:How to set RE450 V2.0 system time?
2019-04-23 03:00:09

Hi,

 

What is the light status of the RE450? FYI, we can change the time zone manually right now. 

 

Generally speaking, once it access internet, it will obtain the right time automatically. 

 

Good day. 

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Re:How to set RE450 V2.0 system time?
2019-06-19 02:12:48 - last edited 2019-06-19 02:13:17

I have the same issue with the AC 750 RE200, the system is not updating the time nor the date automatically, I can't change it manually either.

  0  
  0  
#3
Options
Re:Re:Re:How to set RE450 V2.0 system time?
2019-06-19 05:50:41

Hi,

 

Is there any error message if you failed to change the Time settings manually? 

 

Meanwhile, what is the light status of the RE200? can you access internet from it? 

 

Please try to soft reboot it and then check whether it works. 

 

Any updates, just let us know.

 

Good day. 

Oscarbau wrote

I have the same issue with the AC 750 RE200, the system is not updating the time nor the date automatically, I can't change it manually either.

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options
Re:Re:Re:Re:How to set RE450 V2.0 system time?
2019-06-20 02:36:24

Hi Kevin,

Is there any error message if you failed to change the Time settings manually?

R: There is no way to modify the time manually, as you can see in the image below, the system time and date does not match the extender.

 

Meanwhile, what is the light status of the RE200? can you access internet from it?

 

R: I can access internet without problems

 

Please try to soft reboot it and then check whether it works. 

 

R: I rebooted the extender but still unable to set the time

 

Thanks!

 

 

  0  
  0  
#5
Options
Re:Re:Re:Re:Re:How to set RE450 V2.0 system time?
2019-06-24 09:03:09

Hi,

 

Have you ever tried to change the time zone manually? What happened? 

 

Any updates, please let me know.

 

Good day. 

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#6
Options
Re:Re:Re:Re:Re:How to set RE450 V2.0 system time?
2020-01-08 03:52:53

The same here.

 

It seems that the system time of the server is not correct. I'm living in Switzerland, it's 2020/01/08 04:50am. Completely wrong time and date displayed.

 

 

I tried reset, no success.

 

Could you please check the time of the server machine. Thanks.

  0  
  0  
#7
Options
Re:Re:Re:Re:Re:How to set RE450 V2.0 system time?-Solution
2020-01-09 06:38:52 - last edited 2020-01-10 07:04:44

@Markus99 

 

Hello, try to reboot the RE450; and then please check whether the time shows right one after it booted up. 

 

If still the same, please hard reset it first by holding the reset hole for 1s with the RE450 powered on.

 

Then please login to the web UI and show us a screenshot of the time settings page. 

 

After that, you can reconfigure the RE450 with the main router's wifi and verify whether the time get corrected once it is connected to internet. 

 

Good day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#8
Options
Re:Re:Re:Re:Re:How to set RE450 V2.0 system time?
2020-01-10 03:48:16

@Kevin_Z 

 

Hello,

 

I did 3 restarts, now it works fine.

 

Many thanks!

  0  
  0  
#9
Options
Re:Re:Re:Re:Re:How to set RE450 V2.0 system time?
2020-01-10 07:04:37

@Markus99 

 

Hello, thanks for your valued reply, glad to hear that you figured it out finally. 

 

If need more help in the futured, be free to let us know.

 

Good day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#10
Options
Re:Re:Re:Re:Re:How to set RE450 V2.0 system time?
2020-04-07 13:05:56

@Kevin_Z  I´ve an V.3 with the same problem. The RE450 is paired with EAP225 (not directly to router, is paired with my AP). My EAP225 have date/time correctly. I´ve done 3 hard reset and more soft reset and continue with the date/time incorrect. I don´t know what can i do to syncronize the date/time. Any solution?.

  0  
  0  
#11
Options