Restoring Stock firmware on TL-WR902AC
Hi all,
Having an issue reverting to stock firmware on my TL-WR902AC after experimenting with OpenWRT on it. Going to OpenWRT was easy. Connected a laptop via ethernet, ran a TFTP server, named OpenWRT to tp_recovery.bin and voila. I was expecting reverting back would be the same process; i.e. downloading the stock firmware, renaming it to tp_recovery.bin, etc. The router downloads the tp_recovery.bin file just fine but then goes into a error mode (all lights blinking). The only option I have is to re-flash the OpenWRT.
Anyhelp will be appreciated.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi,
Sorry to tell you that we are not familiar with the 3rd party firmware, like OpenWRT, I'm afraid that there is not much we can help you.
You can serach online to get some help though.
Meanwhile, below is the statement regarding to use the 3rd party firmware.
https://www.tp-link.com/en/support/download/tl-wr902ac/#Firmware
Have a nice day.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi,
Glad to hear that you solved it. Congrats.
If need more help in the future, do not hesitate to contact us.
Have a nice day.
- Copy Link
- Report Inappropriate Content
@thasan10 Hi, do you mind to share the modified oem firmware? my email is joesgs2@gmail.com
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 6100
Replies: 5
Voters 0
No one has voted for it yet.