Latest firmware (version 1.3.1) with new features for Deco M5 is available now

Latest firmware (version 1.3.1) with new features for Deco M5 is available now

58 Reply
Re:Latest firmware (version 1.3.1) with new features for Deco M5 is available
2019-07-20 09:20:11 - last edited 2019-07-20 09:36:18

Today July 19 in Spain, i have entered the new firmware 1.3.1. Build 20190617 Rel 47476 No problems in the update and at the moment all in order.

  0  
  0  
#47
Options
Re:Latest firmware (version 1.3.1) with new features for Deco M5 is available now
2019-07-20 11:14:59

Hi - when logging in through web interface what is the password ?

 

Dave

  0  
  0  
#49
Options
Re:Re:Latest firmware (version 1.3.1) with new features for Deco M5 is available now
2019-07-20 11:34:31

Justin1 wrote

I received the update yesterday (1.3.1).

I tried to connect my Hue bridge to my Deco M5.

But for some reason the deco does not detect the Hue brigde, I restarted both devices already.

The router is in AP mode and not in Router mode, I don't know if that matters?

 

Anyone facing the same issue?

The hue will be linked to your main router, so probably can't add to app. I'll check tomorrow/Monday when I get chance to update as I have hue Bridge as well and use deco m5 in ap mode

  0  
  0  
#52
Options
Re:Re:Re:Latest firmware (version 1.3.1) with new features for Deco M5 is available now
2019-07-20 13:14:04

Hi

 

Ok managed to log in to web interface (thanks for the password hint above) - now being partially sighted this is AWESOME - so much easier to see on my large screen.

 

One thing I have noticed is that it shows all 5 of my decos - but only the main one is named - the other 4 just say "custom" - they are all named in the app - just wondering why ?

 

Dave

  0  
  0  
#53
Options
Re:Re:Re:Re:Latest firmware (version 1.3.1) with new features for Deco M5 is available now
2019-07-21 16:21:51

I just have hue controlled by the hue app or my Google Home devices. 

 

@Kevin_R when u've given the deco's a custom name in the Web interface this is not pulled through. 

  0  
  0  
#55
Options
Re:Latest firmware (version 1.3.1) with new features for Deco M5 is available now
2019-07-21 18:54:46

Upgraded from 1.2.8 to 1.3.1 today. 

 

Unfortunately wired connection speed was reduced by one third (90 -> 60)

 

Modem ---- wired ---> Main Deco ---- wifi ----> Deco ---- wifi ----> Deco ----wifi ----> Deco ---- wired ----> PC

 

Speed reduction from the last Deco in the chain to the PC, one third

  0  
  0  
#56
Options
Re:Latest firmware (version 1.3.1) with new features for Deco M5 is available now
2019-07-23 13:31:12

We have updated to 1.3.1 today for our 9 M5 deco units and the connection information has been very useful to ensure these are best placed around the property, its highlighted a couple of weaker signal blackspots near older thick walls. A question about the mesh connection information for a deco M5 device showing what other device its connected to, in that does one M5 device only connect to one other m5 device or will it connect to multiple M5 devices (mesh) where it can see them? 

  0  
  0  
#57
Options
Re:Re:Latest firmware (version 1.3.1) with new features for Deco M5 is available now
2019-07-26 15:33:19

Still can't change channel width and channels....

  1  
  1  
#58
Options
Re:Latest firmware (version 1.3.1) with new features for Deco M5 is available now
2019-07-28 01:36:15 - last edited 2019-07-28 01:37:24

After upgrading to the latest firmware (1.3.1). All of my deco m5 are having issue on internet connection. Did performed factory settings on all the m5, but guess what... it can't even setup a single deco m5, error message like internet connection not working are shown at the end of the setup process. Managed to troubleshoot with my backup router to check whether is the ISP issue or not, but it shows that my internet is working fine. Anyone facing the same issue as mine? 

  1  
  1  
#59
Options
Re:Re:Latest firmware (version 1.3.1) with new features for Deco M5 is available now
2019-07-29 11:18:15

Shiongii wrote

After upgrading to the latest firmware (1.3.1). All of my deco m5 are having issue on internet connection. Did performed factory settings on all the m5, but guess what... it can't even setup a single deco m5, error message like internet connection not working are shown at the end of the setup process. Managed to troubleshoot with my backup router to check whether is the ISP issue or not, but it shows that my internet is working fine. Anyone facing the same issue as mine? 

 

I upgraded our 3 DECO M5 units at the week-end to 1.3.1 firmware and ever since our internet speed has been all over the place...

 

Have a the DECO system connected to a BT homehub 5 which in turn as fibre connection- getting a solid 300 MBps download when I connect with an ethernet cable direct to the BT homehub

 

But the wifi speeds on the DECO are now very variable.   

 

The main unit next to the BT hub seems mostly OK - but the two other units are very slow / variable.  

 

My Xbox connection is now dreadful (almost unplayable).  Before the upgrade it was perfect - a solid 110-120 MBps 

 

Is it possible to roll back the firmware to a previous version?

  1  
  1  
#60
Options