Home Network Community > Wi-Fi Routers > Archer C6 2.4G band stops working, disable then enable restores
< Wi-Fi Routers

Archer C6 2.4G band stops working, disable then enable restores

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
1282930...

Archer C6 2.4G band stops working, disable then enable restores

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
580 Reply
Re:Archer C6 2.4G band stops working, disable then enable restores
2020-09-27 07:51:19

@Lucasm 

 

Allright. Now you just need to explain why installing OpenWrt solves the problem with the same inferior hardware.

  0  
  0  
#291
Options
Re:Archer C6 2.4G band stops working, disable then enable restores
2020-09-27 09:02:14 - last edited 2020-09-27 09:02:42

 


For me (European model C6 V2 bought in June 2020) everything had worked great until I installed the firmware 1.3.5. and then 1.3.6.

(same SSID for 5 and 2.4 GHz, Guest Network OFF, IP reservated -> DHCP OFF, Smart Connect ON or OFF, TxBF-MU-MIMO ON or OFF, WPA-WPA/2, Version and Encryption AUTO).

 

2.4 GHz WiFi is not working for my ASUS Chromebook, but it worked with the firmware before 1.3.5.

 

Therefore I think hardware is not an issue.

  0  
  0  
#292
Options
Re:Archer C6 2.4G band stops working, disable then enable restores
2020-09-27 09:10:25

@Mare007 

 

Is it possible that the firmware physically fried the 2.4 Ghz band?

  0  
  0  
#293
Options
Re:Archer C6 2.4G band stops working, disable then enable restores
2020-09-27 09:35:22 - last edited 2020-09-27 10:08:09

C6 V2 2.4 GHz works OK with other devices  - 4 Android phones and 2 tablets, the only device I have problem with "C6 V2 2.4 GHz" is Asus Chromebook. But before firmaware 1.3.5 also Asus Chromebook (v. 85.0.4183.131) worked OK on 2.4 GHz. Reboot doesn't help.

 

 

 

And Smart Connect  (ON or OFF) doesn't matter ...

  0  
  0  
#294
Options
Re:Archer C6 2.4G band stops working, disable then enable restores
2020-09-27 09:41:14 - last edited 2020-09-27 09:48:03

Hi folks,

you can also switch off the IGMP proxy under IPTV. It could cripple your entire network (WLAN and LAN) if configured incorrectly.
Many users have also reported that IPTV has stopped working properly.
For me everything that has to do with IPTV is all turned off. Because I don't use that.
My C6 is working now. It is no longer important to me which firmware I use, they all work.
I can only recommend you not to use the BETAs.
They are not tested and you are the testers.
Use the last stable version, it can happen for one time again,the 2.4GHz bug, then just do a reboot and see...

 

PS: And don`t use SMART CONNECT, there are many devices that don`t like that wink

Archer AX73(EU)V1 in Router Mode to use OneMesh with RE300 (used as AP only)
  0  
  0  
#295
Options
Re:Archer C6 2.4G band stops working, disable then enable restores
2020-09-27 10:08:33 - last edited 2020-09-27 10:09:54

@Mare007 

 

And is this problem also, when you change encryption (no encryption), or flash back to 1.3.5 ?

Archer AX73(EU)V1 in Router Mode to use OneMesh with RE300 (used as AP only)
  0  
  0  
#297
Options
Re:Archer C6 2.4G band stops working, disable then enable restores
2020-09-27 10:16:12 - last edited 2020-09-27 10:19:28

The same with option "No Security". I have tried everything ...

  0  
  0  
#298
Options
Re:Archer C6 2.4G band stops working, disable then enable restores
2020-09-27 10:17:33 - last edited 2020-09-27 10:17:58

@aTOMic1971 

 

Wow. Ok I will turn off IGMP proxy and see how it goes. Thanks for the suggestion.

  0  
  0  
#299
Options
Re:Archer C6 2.4G band stops working, disable then enable restores
2020-09-27 11:22:38

@Mare007 

 

When you say "everything", you say this problem is now with 1.3.5 also ?

Then this can be added to the strange bug list.

 

I´have tried any beta also, and I´ve seen the 2.4GHz connection light from my RE300 OneMesh Repeater going on and off like on christmas with that firmwares.

Then I´have emailed with support and they have made a special beta for the C6 with logging function and i have sent them the logs.

All they said was ,that my wireless is going into firmware recovery... . Whatever that means ? But with that beta it was the 5Ghz.

Then i decided to go back to 1.3.4 stable version. And after some time the wireless has begun to run stable.

4 Weeks without the bug.

Then i went to 1.3.5 and the same.

Now I`m on 1.3.6 and no problems. This means i`ve last seen the bug about 2 month`s now.

This does not mean that the bug is resolved, but what does it mean ?

Is this only a side effect when upgrading from a lower version than 1.3.x ?

 

I dont want to go back to something like 1.2.1 or lower this firmwares have other bugs and no OneMesh support.

 

Archer AX73(EU)V1 in Router Mode to use OneMesh with RE300 (used as AP only)
  0  
  0  
#300
Options
Re:Archer C6 2.4G band stops working, disable then enable restores
2020-09-27 13:58:16 - last edited 2020-09-27 14:42:23

I downgraded firmware to 1.3.0 Build 20200402 rel.52000 - 2.4 GHz on Asus still not working ...

 

####################################################################

#                    Archer C6 System Log

# Time = 2020-09-27 16:09:03

# H-Ver = 2.0.0 ; S-Ver = 1.3.0 Build 20200402 rel.52000

# LAN: I = 192.168.1.1 ; M = 255.255.255.0 ; MAC = XX:XX:XX:XX:XX:4E

# WAN: W = dhcp ; I = 192.168.64.103 ; M = 255.255.255.0 ; MAC = XX:XX:XX:XX:XX:4F

#      G = 192.168.64.1 ; D1 = 192.168.64.1 ; D2 = 0.0.0.0

# Clients connected: 8 ; WI-FI : 5

####################################################################

2020-09-27 16:02:05 dhcps[3100]: <6> 212054 send ack ip 192.168.1.202 and dns 192.168.1.1 to XX:XX:XX:XX:XX:8a (PC2)

2020-09-27 16:02:05 dhcps[3100]: <6> 212053 receive request ip 192.168.1.202 from XX:XX:XX:XX:XX:8a

2020-09-27 16:02:05 dhcps[3100]: <6> 212054 send ack ip 192.168.1.202 and dns 192.168.1.1 to XX:XX:XX:XX:XX:8a

2020-09-27 16:02:05 dhcps[3100]: <6> 212053 receive request ip 192.168.1.202 from XX:XX:XX:XX:XX:8a

2020-09-27 16:01:30 dhcps[3100]: <6> 212054 send ack ip 192.168.1.232 and dns 192.168.1.1 to XX:XX:XX:XX:XX:56 (Xiaomi Mi A2-1)

2020-09-27 16:01:30 dhcps[3100]: <6> 212053 receive request ip 192.168.1.232 from XX:XX:XX:XX:XX:56

2020-09-27 16:01:30 dhcps[3100]: <6> 212052 send offer ip 192.168.1.232 and dns 192.168.1.1 to XX:XX:XX:XX:XX:56

2020-09-27 16:01:30 dhcps[3100]: <6> 212051 receive discover from XX:XX:XX:XX:XX:56

2020-09-27 15:55:49 dhcps[3100]: <6> 212054 send ack ip 192.168.1.221 and dns 192.168.1.1 to XX:XX:XX:XX:XX:71 (ONEPLUS 5)

2020-09-27 15:55:49 dhcps[3100]: <6> 212053 receive request ip 192.168.1.221 from XX:XX:XX:XX:XX:71

2020-09-27 15:55:49 dhcps[3100]: <6> 212052 send offer ip 192.168.1.221 and dns 192.168.1.1 to XX:XX:XX:XX:XX:71

2020-09-27 15:55:49 dhcps[3100]: <6> 212051 receive discover from XX:XX:XX:XX:XX:71

2020-09-27 15:54:47 dhcps[3100]: <6> 212054 send ack ip 192.168.1.222 and dns 192.168.1.1 to XX:XX:XX:XX:XX:29 (Nexus 7)

2020-09-27 15:54:47 dhcps[3100]: <6> 212053 receive request ip 192.168.1.222 from XX:XX:XX:XX:XX:29

2020-09-27 15:54:47 dhcps[3100]: <6> 212052 send offer ip 192.168.1.222 and dns 192.168.1.1 to XX:XX:XX:XX:XX:29

2020-09-27 15:54:47 dhcps[3100]: <6> 212051 receive discover from XX:XX:XX:XX:XX:29

2020-09-27 15:53:29 dhcps[3100]: <6> 212054 send ack ip 192.168.1.130 and dns 192.168.1.1 to XX:XX:XX:XX:XX:32 (Xiaomi Mi A2-2)

2020-09-27 15:53:29 dhcps[3100]: <6> 212053 receive request ip 192.168.1.130 from XX:XX:XX:XX:XX:32

2020-09-27 15:53:29 dhcps[3100]: <6> 212052 send offer ip 192.168.1.130 and dns 0.0.0.0 to XX:XX:XX:XX:XX:32

2020-09-27 15:53:29 dhcps[3100]: <6> 212051 receive discover from XX:XX:XX:XX:XX:32

2020-09-27 15:53:25 wireless[11661]: <6> 208040 Wireless band 5G switch set off

2020-09-27 15:51:45 dhcps[3100]: <6> 212054 send ack ip 192.168.1.130 and dns 192.168.1.1 to XX:XX:XX:XX:XX:32 (Xiaomi Mi A2-2)

2020-09-27 15:51:45 dhcps[3100]: <6> 212053 receive request ip 192.168.1.130 from XX:XX:XX:XX:XX:32

2020-09-27 15:51:45 dhcps[3100]: <6> 212052 send offer ip 192.168.1.130 and dns 0.0.0.0 to XX:XX:XX:XX:XX:32

2020-09-27 15:51:43 dhcps[3100]: <6> 212051 receive discover from XX:XX:XX:XX:XX:32

2020-09-27 15:51:40 dhcps[3100]: <6> 212054 send ack ip 192.168.1.231 and dns 192.168.1.1 to XX:XX:XX:XX:XX:b8(ASUS CHROMEBOOK)

2020-09-27 15:51:40 dhcps[3100]: <6> 212053 receive request ip 192.168.1.231 from XX:XX:XX:XX:XX:b8

2020-09-27 15:51:40 dhcps[3100]: <6> 212052 send offer ip 192.168.1.231 and dns 192.168.1.1 to XX:XX:XX:XX:XX:b8

2020-09-27 15:51:40 dhcps[3100]: <6> 212051 receive discover from XX:XX:XX:XX:XX:b8

2020-09-27 15:51:27 upnp[7107]: <6> 217504 Service start

2020-04-02 00:01:45 upnp[7107]: <6> 217505 Service stop

2020-04-02 00:01:40 dhcps[3100]: <6> 212054 send ack ip 192.168.1.220 and dns 192.168.1.1 to XX:XX:XX:XX:XX:68 (HUAWEI P20 LITE)

2020-04-02 00:01:40 dhcps[3100]: <6> 212053 receive request ip 192.168.1.220 from XX:XX:XX:XX:XX:68

2020-04-02 00:01:40 dhcps[3100]: <6> 212054 send ack ip 192.168.1.220 and dns 192.168.1.1 to XX:XX:XX:XX:XX:68

2020-04-02 00:01:40 dhcps[3100]: <6> 212053 receive request ip 192.168.1.220 from XX:XX:XX:XX:XX:68

2020-04-02 00:01:39 nat[5079]: <6> 211021 IPSEC ALG enabled

2020-04-02 00:01:39 nat[5079]: <6> 211021 L2TP ALG enabled

2020-04-02 00:01:39 nat[5079]: <6> 211021 PPTP ALG enabled

2020-04-02 00:01:39 nat[5079]: <6> 211021 SIP ALG enabled

2020-04-02 00:01:39 nat[5079]: <6> 211021 RTSP ALG enabled

2020-04-02 00:01:39 nat[5079]: <6> 211021 H323 ALG enabled

2020-04-02 00:01:39 nat[5079]: <6> 211021 TFTP ALG enabled

2020-04-02 00:01:38 nat[5079]: <6> 211021 FTP ALG enabled

2020-04-02 00:01:33 nat[5079]: <6> 211501 Initialization succeeded

2020-04-02 00:01:32 dhcps[3100]: <6> 212054 send ack ip 192.168.1.222 and dns 192.168.1.1 to XX:XX:XX:XX:XX:29(Nexus 7)

2020-04-02 00:01:32 dhcps[3100]: <6> 212053 receive request ip 192.168.1.222 from XX:XX:XX:XX:XX:29

2020-04-02 00:01:32 dhcps[3100]: <6> 212052 send offer ip 192.168.1.222 and dns 192.168.1.1 to XX:XX:XX:XX:XX:29

2020-04-02 00:01:32 dhcps[3100]: <6> 212051 receive discover from XX:XX:XX:XX:XX:29

2020-04-02 00:01:30 nat[5079]: <6> 211501 Initialization succeeded

2020-04-02 00:01:25 qos[5454]: <6> 259504 Service start

2020-04-02 00:01:25 qos[5454]: <6> 259503 Function disabled

2020-04-02 00:01:21 factory-reset[5268]: <6> 284504 Service start

2020-04-02 00:01:17 dhcps[3100]: <6> 212054 send ack ip 192.168.1.220 and dns 192.168.1.1 to XX:XX:XX:XX:XX:68 (HUAWEI P20 LITE)

2020-04-02 00:01:17 dhcps[3100]: <6> 212054 send ack ip 192.168.1.220 and dns 192.168.1.1 to XX:XX:XX:XX:XX:68

2020-04-02 00:01:17 dhcps[3100]: <6> 212053 receive request ip 192.168.1.220 from XX:XX:XX:XX:XX:68

2020-04-02 00:01:13 dhcpc[4715]: <6> 210054 receive ack from server with ip 192.168.64.103, options(serverid=192.168.64.1;lease=86400;subnet=255.255.255.0;router=192.168.64.1;dns=192.168.64.1;)

2020-04-02 00:01:13 dhcpc[4715]: <6> 210053 send select request with options(cliid=01/ XX:XX:XX:XX:XX:4f:;reqip=192.168.64.103;serverid=192.168.64.1;)

2020-04-02 00:01:13 dhcpc[4715]: <6> 210052 receive offer from server with ip 192.168.64.103, options(serverid=192.168.64.1;lease=86400;subnet=255.255.255.0;router=192.168.64.1;dns=192.168.64.1;)

2020-04-02 00:01:10 dhcpc[4715]: <6> 210051 send discover with ip 0.0.0.0 and flags 8000

2020-04-02 00:01:10 dhcps[3100]: <6> 212054 send ack ip 192.168.1.203 and dns 192.168.1.1 to XX:XX:XX:XX:XX:87  (PC1)

2020-04-02 00:01:10 dhcps[3100]: <6> 212053 receive request ip 192.168.1.203 from XX:XX:XX:XX:XX:87  (PC1)

2020-04-02 00:00:49 parental-control[4057]: <6> 229504 Service start

2020-04-02 00:00:49 parental-control[4057]: <6> 229502 Function enabled

2020-04-02 00:00:46 nat[3308]: <7> 211001 Flush conntrack

2020-04-02 00:00:46 nat[3308]: <6> 211502 Function enabled

2020-04-02 00:00:46 nat[3308]: <5> 211051 Create NAT chain succeeded

2020-04-02 00:00:44 nat[3308]: <6> 211501 Initialization succeeded

2020-04-02 00:00:42 nat[3308]: <6> 211501 Initialization succeeded

2020-04-02 00:00:37 basic-security[2573]: <6> 219504 Service start

2020-04-02 00:00:37 basic-security[2573]: <5> 219606 Flush conntrack table succeeded

2020-04-02 00:00:33 imb[2720]: <6> 218507 Daemon connection succeeded

2020-04-02 00:00:33 imb[2720]: <6> 218012 ARP Binding disabled

2020-04-02 00:00:33 imb[2720]: <6> 218506 Config interface initialization succeeded

2020-04-02 00:00:33 imb[2720]: <6> 218501 Initialization succeeded

2020-04-02 00:00:33 upnp[2525]: <6> 217504 Service start

2020-04-02 00:00:32 access-control[2546]: <6> 239504 Service start

2020-04-02 00:00:32 access-control[2546]: <6> 239503 Function disabled

2020-04-02 00:00:31 firewall[1000]: <6> 209504 Service start

2020-04-02 00:00:31 upnp[2525]: <6> 217505 Service stop

2020-04-02 00:00:00 time-settings[758]: <6> 279504 Service start

 

  0  
  0  
#301
Options
1282930...
Related Articles
 Archer C6 5ghz stops working
1141 0
Archer C6 not working
5419 0
WDS not working on Archer c6
2548 0
 Archer C6 WDS bridge stops working after few days
2497 2
 Archer c6 Disable one Mesh
1754 0
 Archer C6 stops its wifi
798 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.