Archer C6 2.4G band stops working, disable then enable restores
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Recently purchased Archer C6 Router running the latest firmware. On 4 occasions the 2.4G WiFi band has stopped working, devices can connect to it but get no network access. Disabling and enabling the 2.4G band on the admin interface restores the connectivity, the 5G band is not affected, a device connected to it is used to reset the 2.4G band.
I used the chat support service to discuss the issue and the suggestion was to change from automatic to a fixed channel for the 2.4G band, this appeared to resolve the issue but it has happened again today, a phone which only works on 2.4G was showing the WIFI as access denied.
is there anything else I can do to resolve this issue.
StuartP
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Right. I forgot about OPENWRT...
- Copy Link
- Report Inappropriate Content
@StuartP When this issue will be resolved? No one reached my mailbox for the issue.
- Copy Link
- Report Inappropriate Content
Hi everybody,
OpenWRT is solving stability of 2,4GHz ?
Cause I would like toi try but don't want to go back if not working well...
Thks
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
dIaBoLyK wrote
Hi, Which skills exactly ? I have already flash rom on differents phones.... According to the wiki OpenWRT it's just a flash by the web interface of the original firmware no ?
@dIaBoLyK well, I did it with an older FW versions and it required TFTP flashing. Maybe they solved it and now it is possible to flash through web interface.
- Copy Link
- Report Inappropriate Content
I was also thinking abut flashing my C6 to OpenWRT but unfortunatelly I'm a bit busy recently and I can't really spend much time on that matter. If you try flashing yours, could you make a direct list of steps, please?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
That was my plan too but be aware that the C6 seems to have issues with the 5GHz band in OpenWrt.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 5
Views: 125672
Replies: 580
Voters 3
