Archer C6 2.4G band stops working, disable then enable restores
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Recently purchased Archer C6 Router running the latest firmware. On 4 occasions the 2.4G WiFi band has stopped working, devices can connect to it but get no network access. Disabling and enabling the 2.4G band on the admin interface restores the connectivity, the 5G band is not affected, a device connected to it is used to reset the 2.4G band.
I used the chat support service to discuss the issue and the suggestion was to change from automatic to a fixed channel for the 2.4G band, this appeared to resolve the issue but it has happened again today, a phone which only works on 2.4G was showing the WIFI as access denied.
is there anything else I can do to resolve this issue.
StuartP
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I tried that too, but with 1.3-beta-something on the first Archer C6 and 1.3.0 on the 2nd Archer C6 it didn't work. Like mentioned here, installing OpenWRT through the web interface does not always work and depends on the currently installed firmware:
https://openwrt.org/toh/tp-link/tp-link_archer_c6_v2
Cheers
Su
- Copy Link
- Report Inappropriate Content
@dIaBoLyK Did it yesterday and stayed on OpenWrt, much more possibilities.
Btw. had the same issues with 2.4 GHz WiFi after I upgraded the OEM firmware.
- Copy Link
- Report Inappropriate Content
@Su1 went from 1.2.something, 5 or 7, I don't remember
- Copy Link
- Report Inappropriate Content
Let me get it straight. You downloaded one of the below pointed images (Firmware OpenWrt Install? Firmware OpenWrt Upgrade?) and you used it in the TP-Link Firmware Upgrade option in control panel? 
- Copy Link
- Report Inappropriate Content
@nightfever I didn't have issues in 2'4 when I tried openwrt some weeks ago. Do you mean these problems are hardware related?
- Copy Link
- Report Inappropriate Content
@Kubas OpenWrt install and yes uploaded and flashed via the Tp-link user interface. Worked like charm
- Copy Link
- Report Inappropriate Content
@adios I think its a misunderstanding, I have no issues with openwrt so far. Had the WiFi issue threaded here after I updated the tp-link firmware from 1.2.1 to newer one
- Copy Link
- Report Inappropriate Content
These problems are definitely firmware related. There are no problems at all with the 2.4 GHz WiFi and TP-Link's firmware version 1.2.1.
Cheers
Su
- Copy Link
- Report Inappropriate Content
I just installed OpenWRT just as you said, but in my case I had TP-link firmware version 1.3.6 installed. I used 19.07.5 Firmware OpenWRT Install - bin file from: https://openwrt.org/toh/tp-link/tp-link_archer_c6_v2#flash_using_web_interface, and used firmware upgrade option from TP-link control panel. My c6 works without any problems. OpenWRT configuration is a bit different and requires a bit more knowledge than it was in original C6 firmware. I didn't notice any problems with 5GHz network as mentioned somewhere above. Luckily 5GHZ network is not the main type of connection I use so the 2.4Ghz is priority here. Anyway I have to admit that my C6, after number of crashes before, was currently working quite well on 1.3.6 for the last six weeks or so. The only things that I changed six weeks ago was setting channel to 1 and changing position of my C6 in my home network from main router directly connected to fiber Internet modem to additional router, connected by cable to the new main router (I use my old C6 on the 2nd floor now). The position change also changed a bit number of devices that were using my C6. For these 6 weeks my TV, the TP-Link re200 v2 and roof solar panels controller were not connecting to my C6.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 5
Views: 122896
Replies: 580
Voters 3
