Archer C6 2.4G band stops working, disable then enable restores
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Recently purchased Archer C6 Router running the latest firmware. On 4 occasions the 2.4G WiFi band has stopped working, devices can connect to it but get no network access. Disabling and enabling the 2.4G band on the admin interface restores the connectivity, the 5G band is not affected, a device connected to it is used to reset the 2.4G band.
I used the chat support service to discuss the issue and the suggestion was to change from automatic to a fixed channel for the 2.4G band, this appeared to resolve the issue but it has happened again today, a phone which only works on 2.4G was showing the WIFI as access denied.
is there anything else I can do to resolve this issue.
StuartP
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
ArcherC6v2_eu-up-ver1-3-6-P1[20201030-rel60104].zip from Kevin_Z 's link still has issues for me (2.4 ghz band disconnecting all devices after a few hours and not allowing to reconnect, need to reboot router or simply disable 2.4ghz band and reenable it to fix it)
But this works perfectly. Thank you. dIaBoLyK
Kevin_Z any ideas when the next stable release will come out and whether it will contain the fixes from dIaBoLyK 's ArcherC6v2_eu-up-ver1-3-6-P1[20201208-rel52296].zip
{please note this is a temp account with a temp email. i didn't want to create a proper account just for creating a single post.}
- Copy Link
- Report Inappropriate Content
@dIaBoLyK is there any official tp-link ftp / http link for that firmware?
- Copy Link
- Report Inappropriate Content
When i tried to put it here, it seems doesn't work, si i have downloaded it and upload here.
It comes from official link of the french support ;)
- Copy Link
- Report Inappropriate Content
dIaBoLyK wrote
Here is the link of this firmware
using this firmware since december the 11th and no problems !!!!
i have made test with different FW and also another one from TPLINK support which was also a beta one like this one and this is the only one working well ;)
good luck ;)
Hi,
i`ve just upgraded my C6 to the BETA firmware you linked. Thank you for this one.
It`s working well so far. Now lets see how it performs over the next days...
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi all,
i can confirm the firmware 1.3.6 20201208-rel52296 from post #529, is the first BETA that working well for me. Also the performance is good. I use the C6 in router mode with TP-link RE300 in OneMesh. But the C6 acts like an accesspoint, its not my main router.
This is now my new fallback firmware. 
Thanks again. 
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@aTOMic1971 Thanks. I will try when published as stable. If possible, notify it here, please.
- Copy Link
- Report Inappropriate Content
adios wrote
@aTOMic1971 Thanks. I will try when published as stable. If possible, notify it here, please.
I can do that, i plan to upgrade my C6 with the next stable release..., but i will wait if this will be a new version number like 1.4.x, unable to downgrade to 1.3.x .
- Copy Link
- Report Inappropriate Content
Is there an US version of this firmware you linked?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 5
Views: 122961
Replies: 580
Voters 3
