Home Network Community > Wi-Fi Routers > Archer C9 v 5.1 doesn't show clients in iPhone Tether app
< Wi-Fi Routers

Archer C9 v 5.1 doesn't show clients in iPhone Tether app

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C9 v 5.1 doesn't show clients in iPhone Tether app

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C9 v 5.1 doesn't show clients in iPhone Tether app
Archer C9 v 5.1 doesn't show clients in iPhone Tether app
2019-07-19 07:59:44
Model: Archer C9  
Hardware Version: V5
Firmware Version: 1.2.4

Hi,

 

My Archer C9 v 5.1 doesn't show any wifi/wired clients in the iPhone app unless I do a reboot. After I logout from the app then they disappear again and a new reboot is necessary. All clients have full access and function normally.
If I logon through the web interface 192.168.0.1 I can see all clients wifi as well as wired.

 

I have another C9 v 3.0/4.0 that works without any problem, where I see all clients and can block the ones I need to block.

 

Is this a bug or have I accidently configured it strangely?

  0      
 
  0      
 
#1
Options
7 Reply
Re:Archer C9 v 5.1 doesn't show clients in iPhone Tether app
2019-07-24 07:06:05

@Jesper 

 

What is the iOS version of the iPhone?

 

Without any wifi/wired clients showing up, can you see the online devices under Advanced-DHCP client list page? 

 

Please tell us the current firmware version of C9 as well. 

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Re:Archer C9 v 5.1 doesn't show clients in iPhone Tether app
2019-07-25 22:59:33 - last edited 2019-07-25 23:02:43

Hi Kevin,

 

1. Right now it is iOS12.4 but I tried it on the iOS before as well without success. 

 

2. If go to the https://tplinkwifi.net or 192.168.0.1 on a web browser (either on my separate macbook or on the same iphone) I always see the right amount of wifi/wired clients.

When ever I do a reboot on C9 from within the Tether app on the iPhone, I see the correct list of connected devices for a couple of minutes. The list of clients/devices goes away (it says 0 clients) if the phone goes to sleep or if i skip to another app and the returns after a while.

Quitting and Restarting the app doesnt make any difference only rebooting does (but again just for a short period of time...).

 

3. 1.2.4 build 20190403 rel. 63869(4555)

 

FYI.

I have an older C9 v3/4 in another house in the same Tether App on the same iPhone that works without the same bug.

 

  0  
  0  
#3
Options
Re:Re:Re:Archer C9 v 5.1 doesn't show clients in iPhone Tether app
2019-07-26 10:46:17

@Jesper 

 

Thanks for your reply.

 

May I know how many devices connected to the C9 at once? Please show us a screenshot of the DHCP client list page.

 

What is the current internet connection type and DHCP IP pool? Please show us a picture of it as well.

 

Have you ever setup any advanced feature, like access control? 

 

Good day. 

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options
Re:RArcher C9 v 5.1 doesn't show clients in iPhone Tether app
2019-07-26 15:15:01

Hi,

 

1. Anything from 3-12 clients usually no more than 2 wired. I have tried with only one wifi client and with only wifi clients (no wired).

2. The internet connection fiber 100/100Gbit. Last summer I had my C9 v3/4 here at the same connection and similar setup and it worked perfectly.

3. Nope never on this C9.

 

At the same time when logging in the iPhone app it lokks like this:

 

  0  
  0  
#5
Options
Re:RArcher C9 v 5.1 doesn't show clients in iPhone Tether app
2019-10-10 09:28:10

@Jesper: I have the same problem. For me it started when I wired one of my sonos speakers directly to the router via a smart plug connected to a dc outlet. If i disconnect my Sonos speaker then I see all the clients in the tether app

  0  
  0  
#6
Options
Re:RArcher C9 v 5.1 doesn't show clients in iPhone Tether app
2019-10-10 09:35:27

@Franken
Thanks! I actually had a Sonos 1 speaker connected to it back then. I'm going to check if that was the problem.

  0  
  0  
#7
Options
Re:RArcher C9 v 5.1 doesn't show clients in iPhone Tether app
2020-09-02 16:39:56

@Franken mine does this. I just pull down and refresh it and it will show them. Hope it helps.

  0  
  0  
#8
Options

Information

Helpful: 0

Views: 3277

Replies: 7

Related Articles
 ARCHER C9 v5.1 - tether application - does not show clients
1687 0
 Archer C9 doesn't allow wireless clients to connect after reboot.
2574 1
 Archer c9 doesn't cast enough Mbps
237 0
Archer C9 V5 OneMesh?
2164 2
Password Recovery Archer C9
1005 0
 Archer C9 V1 update firmware to Archer C9(US)_V1_210107 caused all LED doesn't lighting.
1156 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.