Router stuck after inserting external drive
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Everything works fine. The moment i connect my WD 4 TB external drive in usb 3.0 port, router gets stuck. All devices disconnected and not possible to connect again. The only way is to reboot the router. I tried Toshiba 1 TB drive, same thing happens. Please support!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
What is the model number of the WD 4TB external drive? What is the format of it? Does it need external power supply?
With it plugged into the computer directly, does it work properly?
What is the led status of the C3150 with the drive plugged in? Can you get internet from it by wired cable? Please click here to check the IP and gateway obtained by your computer.
Are you able to reconnect to the Wifi network? If not, any error message?
Have you ever tried to plug the drive into USB 2.0 port to do a comparison test?
- Copy Link
- Report Inappropriate Content
1. Model of 4TB disk is Western Digital My Passport
2. Doesn't need power supply.
3. NTFS format.
4. Yes, it works properly when it is plugged in the computer.
5. USB LED is on, all LEDs are on, but no internet wireless or wired.
6. I am not able to reconnect. If i do the diagnose of the newtork connection i get an error :THe DNS server isn't responding.
7. I tried USB 2.0, same issue.
In order to get it working, i need to switch off the router, take out the USB and switch on the routher again.
please support.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
If I check IP as per below procedure i get local IP with 192...i have checked the IP when i logged into the router. below is the screen shot once i have ping it:
fyi: once i connect external drive, i am not even able to access the router.
- Copy Link
- Report Inappropriate Content
This IP is the internet IP address of the main router.
While we need ping the LAN IP of the C3150 when it gets stuck. So with the HDD plugged and router stucked, please try to ping the LAN IP of Archer C3150 and show us the screenshot of it.
Note: The LAN IP of Archer C3150 is 192.168.0.1 by default.
Then is there any error message if you cannot access the router? Please check the IP and gateway obtained by your computer at that point as the instruction below.
- Copy Link
- Report Inappropriate Content
after 5min of inserting the external drive i am not able to ping the DNS:
there is no any error, i am just not able to access the router:
please also note that all LEDs are ON:
and if i check the IP as per the instruction i get "no internet connection":
- Copy Link
- Report Inappropriate Content
Hi @Kevin_Z any update?
- Copy Link
- Report Inappropriate Content
@Kevin_Z ?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1586
Replies: 8
Voters 0
No one has voted for it yet.