Separate 2.4 ghz and 5 ghz on Deco M4
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
I configured the m4 as a router and I need to separate the 2.4 and 5 ghz bands, but on the app (Android in my case), i don't see the switch option in Main Network as written in the guide https://www.tp-link.com/us/support/faq/1591/
how can i do?
thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
I had the same issue however, I found out a workaround wherein you can disable the 2.4Ghz from the main network and enable the Guest network with 2.4GHz and you can choose the name for both of them accordingly.
Hope this helps.
- Copy Link
- Report Inappropriate Content
@Kevin_Z Any update on the firmware to separate 2.4ghz and 5ghz bands?
- Copy Link
- Report Inappropriate Content
@kevin_z Waiting......or being misled? When this firmware will come out???? This is causing a lot of troubles for smart speakers.
- Copy Link
- Report Inappropriate Content
It's been over a year now and no answer or update, they probably don't even care and aren't working on an update, i should have bought another brand mesh system.
- Copy Link
- Report Inappropriate Content
@sasasi91 I have personally given it up...still using it, but are just waiting for a proper(at reasonible price)WiFi6 Mesh to buy,
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Billie-Turf it won't happen but there is a workaround, set up the guest as only 2.4 and connect devices which won't connect to the duel one. It works perfectly just make sure you add a password.
- Copy Link
- Report Inappropriate Content
Please make this feature available. A lot of Internet of Things devices only work in 2.4 Ghz mode. Altough the Deco is capable of dualband, but some devices like my Macbook air from 2014 has a tendency to connect to 2.4 Ghz. Only by disabling 2.4 Ghz, it connects to the 5 Ghz mode.
Things would be much easier with seperate SSID's for 2.4 and 5 Ghz.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi,
Thank you very much for your concern about this case.
Currently, we did not have the plan to add separate SSID for 2.4ghz and 5ghz, only separate on/off switch for the two bands.
Since the reason we bought Deco is mainly for its mesh feature, if you use two SSIDs on the Deco, it would break the mesh.
And there would be a workaround for your reference:
1. set up main network with 5ghz only for one SSID;
2. then create a guest network with 2.4ghz only for another SSID;
Thanks a lot for your understanding and support.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 7
Views: 48310
Replies: 47
Voters 4
