Why two Ethernet ports?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.Why two Ethernet ports?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I just got Deco M5 installed and working. But I'm curious about two Ethernet ports. One is connected to a router CTS FWR5-3105, a device with ports for Ethernet (Deco M5 connected), optical fiber (Internet), and wi-fi. So what is other Ethernet port (in Deco M5) for? Is it a passthrough for a desktop computer without wi-fi hardware? Can I use Ethernet ports to connect desktop computers without their own wi-fi hardware?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
There are 2 ethernet ports on each Deco, one for the internet source/modem, the other one can be used to get internet with wired cable connected. In other word, you can connect your desktop computer to the 2nd port to get internet.
For more details, please have a look at this link: Deco Ethernet backhaul
Best regards.
- Copy Link
- Report Inappropriate Content
There are 2 ethernet ports on each Deco, one for the internet source/modem, the other one can be used to get internet with wired cable connected. In other word, you can connect your desktop computer to the 2nd port to get internet.
For more details, please have a look at this link: Deco Ethernet backhaul
Best regards.
- Copy Link
- Report Inappropriate Content
I plugged M5 to a desktop computer without its own wi-fi, and it works. Windows 10 seems to think that it Internet connection is by the way of Ethernet. All seems to work as expected, no problems whatsoever. Though lack of instructions in this detail had me bit worried.
- Copy Link
- Report Inappropriate Content
Thanks for your reply, glad to hear that they are working properly.
You can refer to the user guide for more information.
- Copy Link
- Report Inappropriate Content
@Kevin_Z hallo Kevin can I use the ether et port to connect my Nas storage and share it to the whole network through it?
- Copy Link
- Report Inappropriate Content
@Mgmsyq Yes you can; same as any other router.
I personnaly have a Deco M9 Plus set and, I have a NAS and an Ooma Telo plugged in a switch that is then plugged in the main Deco router second Ethernet port. This also gives me the option to plug my office laptop via Ethernet if I ver need to.
I assume the Deco M5 Ethernet ports has the same functions and, as such, if you Nas is the only equipement you need to connect by ethernet then, yes, you can use that port.
- Copy Link
- Report Inappropriate Content
@TheClerk thanks buddy
- Copy Link
- Report Inappropriate Content
Hey @TheClerk I'm struggling to get anything to work through a TP-Link switch that I have. Would you tell us what switch you're using?
- Copy Link
- Report Inappropriate Content
Can i connect a D-Link 24 Hub to one of the Ethernet Ports of the mesh?
- Copy Link
- Report Inappropriate Content
@Matti AFAIK another use for the ethernet ports, if you have a cabled network, is to connect the AP's through it instead of WiFi (Ethernet Backhaul)
- Copy Link
- Report Inappropriate Content
With the Decos running in router mode, is the second ethernet port "behind" the deco's firewall?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 6
Views: 89270
Replies: 17
Voters 0
No one has voted for it yet.