Home Network Community > Access Points > MR6400 to WA901ND
< Access Points

MR6400 to WA901ND

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

MR6400 to WA901ND

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
MR6400 to WA901ND
MR6400 to WA901ND
2019-09-26 13:30:24 - last edited 2019-09-29 06:25:20

Hi All. I have had a number of BT Routers in the past that have provided WiFi to most of our house. We have an annex that we had to fit an Access Point to (WA901ND) All worked fine.

 

We have moved away from BT and I now have a SIM card and a MR6400.

 

When I connect the cable from the Access Point into the LAN port on the Hub, the AP doesn't see it.

 

The guy that fitted my AP is away on Leave, but has told me that he doesn't think it needs any configuration doing to it.

 

Can anyone advise what I should do please?

 

Much appreciated in advance,

 

Sam

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:MR6400 to WA901ND-Solution
2019-09-27 03:24:53 - last edited 2019-09-29 06:25:20

@SackbutSam 

 

The TL-WA901ND is plug and play, no configuration needed.

 

Please ensure that you can get internet from the TL-MR6400 with the sim card. 

 

Then try to hard reset the TL-WA901ND by holding the reset button/hole for 10s with the access point powered on. 

 

After that, reconnect the AP to the LAN port of the TL-MR6400 and verify whether it works well.

 

May it help and have a good day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  1  
  1  
#2
Options
Re:MR6400 to WA901ND-Solution
2019-09-27 22:18:14 - last edited 2019-09-29 06:25:26

@Kevin_Z 

 

Hi Kevin. The reset worked a treat - all up and running and the home flooded with Internet!

 

Thank you - very much appreciated!

 

Sam.

Recommended Solution
  0  
  0  
#4
Options
4 Reply
Re:MR6400 to WA901ND-Solution
2019-09-27 03:24:53 - last edited 2019-09-29 06:25:20

@SackbutSam 

 

The TL-WA901ND is plug and play, no configuration needed.

 

Please ensure that you can get internet from the TL-MR6400 with the sim card. 

 

Then try to hard reset the TL-WA901ND by holding the reset button/hole for 10s with the access point powered on. 

 

After that, reconnect the AP to the LAN port of the TL-MR6400 and verify whether it works well.

 

May it help and have a good day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  1  
  1  
#2
Options
Re:MR6400 to WA901ND
2019-09-27 04:53:08

Thanks @Kevin_Z. I will try that and report back.  I can deffo get internet from the SIM card in the MR6400.  I tried a power down of the AP, but not a Reset.

 

Cheers.

  0  
  0  
#3
Options
Re:MR6400 to WA901ND-Solution
2019-09-27 22:18:14 - last edited 2019-09-29 06:25:26

@Kevin_Z 

 

Hi Kevin. The reset worked a treat - all up and running and the home flooded with Internet!

 

Thank you - very much appreciated!

 

Sam.

Recommended Solution
  0  
  0  
#4
Options
Re:MR6400 to WA901ND
2019-09-29 06:24:48

@SackbutSam 

 

Thanks for your reply, glad to hear that it works finally.

 

Now you can enjoy the internet with the TP-Link devices. 

 

Best regards. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  1  
  1  
#5
Options

Information

Helpful: 0

Views: 761

Replies: 4

Related Articles
[Solved] TL-WA901N vs TL-WA901ND
3353 0
 Difference between TL-WA901N and TL-WA901ND
4897 0
TL-WA901N(D) how do you achieve 450mbps? I am stuck at 100mbps
1091 0
tl-wa901nd no Wifi led on
1179 0
 Tl-wa901nd
270 0
 Bricked wa901nd?
1107 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.