TP-Link Gigabit network adapter stays at 100Mbps

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP-Link Gigabit network adapter stays at 100Mbps

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP-Link Gigabit network adapter stays at 100Mbps
TP-Link Gigabit network adapter stays at 100Mbps
2019-10-08 13:26:52 - last edited 2019-10-11 08:25:23
Model: TG-3468  
Hardware Version: V3
Firmware Version: 9.1.409.2015

Dear reader,

 

A while ago i build a new PC. Considering my dad told me that we had a 250Mb internet speed in the house i ran some tests. On my pc i saw i was only getting around 80-90 Mb download and 20 upload which is decent. But knowing we had the capability to go higher i went on a search. I found a device that supposedly should handle the 250 Mb internet speed and bought it right away. it is the TG-3468 and i installed it in the PCi e slot in my computer. i started up the computer again and checked if the software was up to date. which it was. it still showed me the 80-90Mb and as i checked on the back of the adapter it was flashing the little green light on the slot for 100Mb. So im wondering now: what went wrong? Anybody that can help me with this? :)

Im dutch, we have ZIGGO internet. And the computer i build has a MSI B450 TOMAHAWK MAX Motherboard. I dont know if it has to do with the build limitations or something with the settings. 

 

Kind regards,

Tamminga

 

EDIT: I saw on a different post the following step to try: https://www.tp-link.com/support/faq/2265/

I did this and it said 100MBps

  0      
  0      
#1
Options
2 Accepted Solutions
Re:TP-Link Gigabit network adapter stays at 100Mbps-Solution
2019-10-09 03:52:29 - last edited 2019-10-11 08:25:23

@Tamminga 

 

Hello, what is the operating system of your computer? 

 

WIth computer connected to the host wifi, please click here to check the wireless negotiation speed. 

 

Try to change another PCI-e slot to plug it and give it a go.

 

Any updates, please let us know. 

 

Good day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:TP-Link Gigabit network adapter stays at 100Mbps-Solution
2019-10-09 09:17:41 - last edited 2019-10-11 08:25:34

@Kevin_Z

 

Hi Kevin,

 

Thanks alot! Simply changing the PCIe slot made the difference. 

im running the full 250Mb/s right now :D

 

Greetings, 

Tamminga

Recommended Solution
  0  
  0  
#3
Options
6 Reply
Re:TP-Link Gigabit network adapter stays at 100Mbps-Solution
2019-10-09 03:52:29 - last edited 2019-10-11 08:25:23

@Tamminga 

 

Hello, what is the operating system of your computer? 

 

WIth computer connected to the host wifi, please click here to check the wireless negotiation speed. 

 

Try to change another PCI-e slot to plug it and give it a go.

 

Any updates, please let us know. 

 

Good day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:TP-Link Gigabit network adapter stays at 100Mbps-Solution
2019-10-09 09:17:41 - last edited 2019-10-11 08:25:34

@Kevin_Z

 

Hi Kevin,

 

Thanks alot! Simply changing the PCIe slot made the difference. 

im running the full 250Mb/s right now :D

 

Greetings, 

Tamminga

Recommended Solution
  0  
  0  
#3
Options
Re:TP-Link Gigabit network adapter stays at 100Mbps
2019-10-11 08:24:17

@Tamminga 

 

That would be great, glad to hear that it works finally.

 

Now you can enjoy the internet. 

 

Best regards. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options
Re:TP-Link Gigabit network adapter stays at 100Mbps
2019-10-19 18:21:24

@Tamminga 

I have the same problem yet i have tried everything and it still stays the same (100MB). If anyone has any suggestions i really could use some help 

  0  
  0  
#5
Options
Re:TP-Link Gigabit network adapter stays at 100Mbps
2020-01-22 17:09:07
Same here. Oddly it negotiates at 1 Gb under Win 10 but only 100 Mb under XP. Any ideas, @Kevin_Z?
  0  
  0  
#6
Options
Re:TP-Link Gigabit network adapter stays at 100Mbps
2020-06-25 09:54:22 - last edited 2020-06-25 09:55:02

@Tamminga 

Hello people, I have the same problem on Win 10, I already change cables / bought this adapter / Speed & Duplex to 1.0gbps Full Duplex and... Nothing, really can't understand the problem.

Anyone have a solution for this?

Many thanks

Pedro Cruz

  0  
  0  
#7
Options