Deco M9 Plus slow LAN speed - help me please
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi
I’m having some serious speed issues with my Deco M9 plus.
Until recently I had a 100/100mbit internet line, and all was fine. The Deco app speed check confirmed speeds of 90/90 to 100/100mbit, and I was measuring this speed also on my desktop PC over LAN and on several wireless devices (iPhone 8, iPad, labtop PC).
Now my internet was upgraded to 500/500mbit (this is at least what am now paying for). Running test on the Deco app I consistently get over 600/600mbit test results. BUT… everywhere else I test, I remain at approx. 90/90mbit, and this applies for both LAN and WiFi!!
When I plug in my desktop PC directly to the modem, I get approx. 600/600 over LAN (using a 15m Cat6e cable). When I add the Deco over LAN, and no other devices, no switch or anything else, the LAN speed is reduced to approx. 90/90 (adding a 1m Cat7 cable). This is using the same test engine running on the desktop PC. What is going on here??
I tried taking one of my other Deco’s, resetting it, re-adding to the Deco network and setting this as main Deco. But all with the same poor result.
I’ve not bothered trying to troubleshoot the wireless connection yet, as resolving my LAN speeds has prio.
Help!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Dzal wired directly from the m9 to the pc or via a switch?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Good day,
Could you please check the following information:
1. Change a different Ethernet cable to have a look;
2. Check the Ethernet link speed on the Deco: https://www.tp-link.com/support/faq/2899/
3. Was the Deco M9 on AP mode or router mode?
4. Please change another satellite Deco as the main Deco to see if that helped: https://www.tp-link.com/support/faq/2400/
Thank you very much and wait for your reply.
- Copy Link
- Report Inappropriate Content
1. Tried a different cable as well as a different computer. Same result
2. Checked the link speed and it's set to 1 gbps.
3. Deco is set in router mode.
4. Tried different Decos as the main, no change.
Wired still caps out at 100 mbps while wireless I'm getting close to 350 mbps.
any other suggestions I'm all ears
- Copy Link
- Report Inappropriate Content
Nothing else? Still haven't been able to get it above 100mbps wired....
- Copy Link
- Report Inappropriate Content
I've been having problems with slow lan-transfer speeds since day one with my 3 M9+ and not expecting this to get fixed anytime soon if ever. When doing a google-search there is plenty of other users having the same problem with other models in the Deco series so it's not problem isolated to the M9+
The product works fine when using WIFI but when connecting devices to the Deco's on ETH the LAN-transfer speed between devices cap out at 100-250Mbit making sending large amounts of data from one device to another taking a long time.
What i would like to know if there are users that get device to device transfer-speeds of close to 1000Mbit. If not then I can atleast give up and focus on other things.
- Copy Link
- Report Inappropriate Content
@Dzal i have the same problem,
(All CAT6 Cables)
hooked up lan from deco directly to pc and got 9+Mbps.
wifi speed @ 100-190Mbp standing very close, next to deco.
Speed is NOT even close to what was ADVERTISED.
currently my bandwidth is 800Mbps. and when speed test using deco app will go to 7++Mbps which is good.
but why is the WIFI and LAN on the DECO so slow....????
- Copy Link
- Report Inappropriate Content
johsam wrote
I've been having problems with slow lan-transfer speeds since day one with my 3 M9+ and not expecting this to get fixed anytime soon if ever. When doing a google-search there is plenty of other users having the same problem with other models in the Deco series so it's not problem isolated to the M9+
The product works fine when using WIFI but when connecting devices to the Deco's on ETH the LAN-transfer speed between devices cap out at 100-250Mbit making sending large amounts of data from one device to another taking a long time.
What i would like to know if there are users that get device to device transfer-speeds of close to 1000Mbit. If not then I can at least give up and focus on other things.
I run my Deco mesh in AP mode. I connected desktop computer to Deco M5, using CAT 5e cable. Desktop has gigabit Ethernet card and no WiFi card.
Deco M5 is wired to ISP gateway through gigabit switch and another CAT 5e.
Desktop PC<---Ethernet--->Deco node<---Ethernet--->Gigabit Switch<---Ethernet--->ISP Gateway
I ran speedtest from fast.com on my ISP Internet connection. I got results way higher than cap of 250Mbit you mention. It maxed my ISP connection. It is possible that in router mode the cap exists, but not in AP mode. It is also possible that cables make the difference - mine are just CAT 5e, but I know they are of very good quality.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 8626
Replies: 30
Voters 1
