Mesh Technology switch
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
M9 Plus (fw 1.3.0) and M5 (fw 1.3.1) both have a switch 'Mesh Technology' for each connected device. It states: "Disabling this option will turn off seamless roaming between Decos for this device".
When I enable this option for a specific device, then this device still connects with mulitple Deco units. Can you please explain more what this switch 'Mesh Technology' does? Thank you!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Like mentioned on the Deco app, with Mesh Technology option disabled, the seamless roaming between Decos for this device will be turned off. That is to say, once you disabled the mesh technology, the Deco won't suggest the clients to roam seamlessly between Decos, while if the client itself wants to do that, the seamless roaming won't be affected.
On the other hand, if you enabled this option, this device will connect to the multiple Decos due to the signal strength. So it is normal.
Good day.
- Copy Link
- Report Inappropriate Content
First, it is correct,.
Second, it is possible, you can disable the mesh technology for the specific device; even though we mentioned that the clients are still able to connect to different Decos, please notice that the premise is that the signal strength obtained by it is not good; while for the non-moving device, usually, they can get a good and stable signal from the certain device, therefore, they won't switch to connect to other Decos.
May it help and have a nice day.
- Copy Link
- Report Inappropriate Content
Like mentioned on the Deco app, with Mesh Technology option disabled, the seamless roaming between Decos for this device will be turned off. That is to say, once you disabled the mesh technology, the Deco won't suggest the clients to roam seamlessly between Decos, while if the client itself wants to do that, the seamless roaming won't be affected.
On the other hand, if you enabled this option, this device will connect to the multiple Decos due to the signal strength. So it is normal.
Good day.
- Copy Link
- Report Inappropriate Content
I am sorry I don't understand fully.
#1: So, with Mesh Technology disabled, devices (that stay at the same position and don't move at all) can still connect with different Deco units. But that is determined by the device itself and not the Deco network. Correct?
#2: Ideally, I want certain non-moving devices to connect with a specific Deco unit and stick to that Deco unit. Is this possible?
- Copy Link
- Report Inappropriate Content
First, it is correct,.
Second, it is possible, you can disable the mesh technology for the specific device; even though we mentioned that the clients are still able to connect to different Decos, please notice that the premise is that the signal strength obtained by it is not good; while for the non-moving device, usually, they can get a good and stable signal from the certain device, therefore, they won't switch to connect to other Decos.
May it help and have a nice day.
- Copy Link
- Report Inappropriate Content
@Kevin_Z : Thanks. Although the software/firmware does have its limitations, you are doing your best to support the community.
- Copy Link
- Report Inappropriate Content
Thanks for your reply, and glad to help you.
We will keep working to provide better products and customer service/support.
If need more help, do not hesitate to contact us.
Good day.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1765
Replies: 5
Voters 0
No one has voted for it yet.