Deco P7 internet problems
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.Deco P7 internet problems
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
1. Deco P7 works, but sometimes on my smartphone and my parents/brothers smartphone, it says that the internet doesnt work.
2. Another Problem: MY setup
Fritzbox 7590(router)--------DECO MAIN(connected with LAN to the router)-------DECO B(connected to DECO C)------DECO C(connected to DECO MAIN)
why does the DECO C connects to the DECO MAIN and not to DECO B?
With this configuration, is router mode fine or should i switch to AP Mode?
3. does AP Mode makes the wifi better, stable?
im asking because i have the option to connect all decos via Ethernet to the router.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello, what is the error message on the APP?
At that time, please verify which Deco the client has connected to and get the IP address of that Deco on the Deco app; Then try to ping the IP of the connected Deco and the main Deco.
Regarding to the current setup, it is suggested to change the Fritzbox 7590 as bridge mode and the Deco as the main router, or you can change the Deco to access point mode to avoid the double NAT issue.
For the difference between router mode and AP mode, please refer to https://www.tp-link.com/support/faq/2399/
Meanwhile, there is no option to fix the signal source Deco yet, while we have noted that; for the current issue, it seems that the signal strength obtained by the Deco C from the main Deco does not reach the threshold value which does not trigger the AP/Bandsteering; You can move the 2 Decos further away from each other or reboot them to give it a go.
May it help and have a nice day.
- Copy Link
- Report Inappropriate Content
Hello, in AP mode, there is no 2 different networks anymore; instead, all the IP addresses are assigned by the Fritzbox, and the devices connected to the Deco or Fritzbox can access each other easily;
While in router mode, there are 2 networks, one for Fritzbox, the other one for Deco; there are 2 NAT devices existed.
In AP mode, it has nothing to do with the Fritzbox's wifi; it just changes to another operation mode to boost the wifi signal, a separate wifi network from the firtzbox.
Good day.
- Copy Link
- Report Inappropriate Content
Hello, what is the error message on the APP?
At that time, please verify which Deco the client has connected to and get the IP address of that Deco on the Deco app; Then try to ping the IP of the connected Deco and the main Deco.
Regarding to the current setup, it is suggested to change the Fritzbox 7590 as bridge mode and the Deco as the main router, or you can change the Deco to access point mode to avoid the double NAT issue.
For the difference between router mode and AP mode, please refer to https://www.tp-link.com/support/faq/2399/
Meanwhile, there is no option to fix the signal source Deco yet, while we have noted that; for the current issue, it seems that the signal strength obtained by the Deco C from the main Deco does not reach the threshold value which does not trigger the AP/Bandsteering; You can move the 2 Decos further away from each other or reboot them to give it a go.
May it help and have a nice day.
- Copy Link
- Report Inappropriate Content
@kostaK - as you have a extremely capable router (The Fritzbox) I would personally run the Deco's in AP mode - it makes everything simpler IMHO. It's the way I run my Decos and Fritzbox.
Tor
- Copy Link
- Report Inappropriate Content
1.There is no error message. i disabled fast roaming now, maybe that works.
2.right now, my setup works good. even if it works good, should i switch the fritzbox to bridge mode?
does this gonna work?
- Copy Link
- Report Inappropriate Content
if i do this, do i need to connect evry deco with LAN to the router or is there another possiblity?
i have 3 decos, so idk if its worth it.
right now my fritzbox makes herself an network and the decos make one.
do you have deco p7?
do i need to set the fritzbox to mesh master if i do this with the decos?
- Copy Link
- Report Inappropriate Content
i updated my setup now.
Now it is like this:
Fritzbox(main router)--------Deco A(connected per Ethernet)-------Deco B(connected via WiFi with Deco A)--------Deco C (connected via Wifi with Deco )
now my question, what does the ap mode makes better? do i have now more range or soemthing like that?
my fritzbox is in the cave, so i dont think it makes the internet faster.
Tor-Arne wrote
@kostaK - as you have a extremely capable router (The Fritzbox) I would personally run the Deco's in AP mode - it makes everything simpler IMHO. It's the way I run my Decos and Fritzbox.
Tor
- Copy Link
- Report Inappropriate Content
@kostaK IMHO the AP mode is a simplified version of the AP mode as a good example in non-AP mode
Internet addresses -> Fritzbox addresses -> Deco addresses
in AP mode
Internet addresses -> Fritzbox addresses
In non-AP mode all your devices are assigned DHCP addresses by the Deco.
In AP mode all your devices get their DHCP addresses from the fritzbox
and so on - you are duplicating a lot of functionality in both Fritzbox and Decos - leading to a lot of issues if you want to set up f.x a VPN from your laptop on the internet to computers connected to the Deco. I assume you do not use the wireless access point in the Fritzbox, as this is now on a different network from the Deco connected devices?
But if if works as you want it to - keep it in non-AP mode. The range and speed will not really be affected.
Tor
- Copy Link
- Report Inappropriate Content
I have 6 P7's and 2 of them are connected with Ethernet to the same LAN as the Fritzbox. The rest of the network the P7's will figure out themselves, no need to connect them using Ethernet, as they will connect to each other and the main P7 (The Ethernet connected one) through WiFi or the mains electricity network.
Tor
- Copy Link
- Report Inappropriate Content
in the AP Mode, the fritzbox works as Master and the other as Slaves right? so i use the fritzbox.
in the Router Mode, the Fritzbox makes himself 1 network, and the decos make 1 network.
The network from the fritzbox i dont use, because the fritzbox is in the cave.
now in AP Mode, they work all in the same network.
is this better? im not using any vpn.
- Copy Link
- Report Inappropriate Content
in the AP-Mode i activated the Network of the fritzbox, normally i deactivate it bcz i dont need it.
now the fritzbox does Wlan and the wlan of the fritzbox gets extended by my 3 decos right?
- Copy Link
- Report Inappropriate Content
Hello, in AP mode, there is no 2 different networks anymore; instead, all the IP addresses are assigned by the Fritzbox, and the devices connected to the Deco or Fritzbox can access each other easily;
While in router mode, there are 2 networks, one for Fritzbox, the other one for Deco; there are 2 NAT devices existed.
In AP mode, it has nothing to do with the Fritzbox's wifi; it just changes to another operation mode to boost the wifi signal, a separate wifi network from the firtzbox.
Good day.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 5665
Replies: 20
Voters 0
No one has voted for it yet.