This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.Archer T4E high ping every 5-10 secoinds
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I have problem with my connection, I connet WiFi by Archer 4E card
Ping to my router:
Pinging 192.168.0.1 with 32 bytes of data:
Reply from 192.168.0.1: bytes=32 time=3ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1936ms TTL=64
Reply from 192.168.0.1: bytes=32 time=6ms TTL=64
Reply from 192.168.0.1: bytes=32 time=17ms TTL=64
Reply from 192.168.0.1: bytes=32 time=15ms TTL=64
Reply from 192.168.0.1: bytes=32 time=3ms TTL=64
Reply from 192.168.0.1: bytes=32 time=3ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1558ms TTL=64
Reply from 192.168.0.1: bytes=32 time=3ms TTL=64
Reply from 192.168.0.1: bytes=32 time=4ms TTL=64
Reply from 192.168.0.1: bytes=32 time=4ms TTL=64
Reply from 192.168.0.1: bytes=32 time=3ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1737ms TTL=64
Reply from 192.168.0.1: bytes=32 time=3ms TTL=64
Reply from 192.168.0.1: bytes=32 time=4ms TTL=64
Reply from 192.168.0.1: bytes=32 time=3ms TTL=64
I checked ping in my two laptops from the same place in my home and ping is ok, so it's not a problem with my router, it's not a problem with distance.
In all device OP is Windows 10.
I shutdown almost all processes and I have still same problem.
I tried many many many things ;).
And after reinstall drivers (from dvd), ping was ok :), but after restart computer ping returned to "normal"
Finally I found workaround, when I set autoconfig disabled (like this: netsh wlan set autoconfig enabled=no interface="Wi-Fi"), ping is ok.
I must allways enable this before shutdown (otherwise it will not connect to netowrk after start).
But this is only workaround, I think that problem my be in drivers?
Any idea?
Regards
Tomasz Boryło
