TL-PA4010 KIT AV600 Firmware
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.TL-PA4010 KIT AV600 Firmware
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
I'm looking for the 1.3.1.2141-00_401013_171025_901 firmware for the TL-PA4010 powerline adapter.
I mistakenly updated it with 1.3.0.2134-00_401003_171219_901 older version.
Cheers
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
The 171219 is the latest firmware for the US version, while the 171025 is the latest one for the EU version.
May I know what is the country version of your device? It is printed on the back panel of the actual device, next to the model number.
Besides, does it affect the actual performance of the adapter?
Good day.
- Copy Link
- Report Inappropriate Content
@Kevin_Z the country version is EU.
Not sure but since I changed the firmware version sometimes it doesn't resume from standby.
Regards
- Copy Link
- Report Inappropriate Content
I see, you can try to disable power saving mode to verify whether it helps to solve this issue.
https://www.tp-link.com/support/faq/2018/
Back to the firmware, it is not suggested to flash it back to EU version again, cause it may damage the device.
Good day.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Support is poor here.
Use your pib file with this nvm file:
https://mega.nz/#!ZRkgnIhb!2NiQdN4Z9Yg8frL2r86eIbRZAE9oCN2TW_prQFzfn_k
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Yes, it is offiicial from Qualcomm. Nvm fits all with the same chip. Only pib file is different to the other powerline seller therefore use the one from tp-link. tp-link does not bring newer firmwares due to support costs money.
- Copy Link
- Report Inappropriate Content
Could you please put EU version of the firmware online? I've upgraded my 4010s to the US version of the firmware and my rate dropped below 300mbits, while before it was around 500mbits.
I was not able to find original EU firmware for 4010 V3 anywhere on the internet.
Thank you very much.
- Copy Link
- Report Inappropriate Content
the firmware has nothing to do with country regulations ( EU, US, UK, etc ). It is universal, and it is the same for all manufacturers using the same atheros/qualcomm chipset, device models, device versions, and countries. the .pib file is the one responsible to configure the device with the proper parameters, for instance regulation frequencies. So, in your case, select a .pib file for your device with the country of your choosing and use the .nmv file provided by @Kevin_Z
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 11322
Replies: 17
Voters 0
No one has voted for it yet.