TL-PA4010 KIT AV600 Firmware

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

TL-PA4010 KIT AV600 Firmware

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-PA4010 KIT AV600 Firmware
TL-PA4010 KIT AV600 Firmware
2019-12-09 18:50:02
Model: TL-PA4010 KIT  
Hardware Version: V3
Firmware Version: 1.3.1.2141-00_401013_171025_901

Hi,

 

I'm looking for the 1.3.1.2141-00_401013_171025_901 firmware for the TL-PA4010 powerline adapter.

I mistakenly updated it with 1.3.0.2134-00_401003_171219_901 older version.

 

Cheers

Michele
  0      
  0      
#1
Options
17 Reply
Re:TL-PA4010 KIT AV600 Firmware
2019-12-10 09:16:24

@Mikhele 

 

The 171219 is the latest firmware for the US version, while the 171025 is the latest one for the EU version. 

 

May I know what is the country version of your device? It is printed on the back panel of the actual device, next to the model number. 

 

Besides, does it affect the actual performance of the adapter? 

 

Good day. 

  0  
  0  
#2
Options
Re:TL-PA4010 KIT AV600 Firmware
2019-12-10 22:58:35

@Kevin_Z the country version is EU.

Not sure but since I changed the firmware version sometimes it doesn't resume from standby.

 

Regards

Michele
  0  
  0  
#3
Options
Re:TL-PA4010 KIT AV600 Firmware
2019-12-11 01:23:59

@Mikhele 

 

I see, you can try to disable power saving mode to verify whether it helps to solve this issue. 

https://www.tp-link.com/support/faq/2018/

 

Back to the firmware, it is not suggested to flash it back to EU version again, cause it may damage the device. 

 

Good day. 

  0  
  0  
#4
Options
Re:TL-PA4010 KIT AV600 Firmware
2019-12-12 22:27:17

@Kevin_Z thanks for you reply back.

If I get right firmware, why don't flash it back.

 

Cheers

Michele
  0  
  0  
#6
Options
Re:TL-PA4010 KIT AV600 Firmware
2019-12-13 00:57:26

@Mikhele 

Support is poor here.

Use your pib file with this nvm file:
https://mega.nz/#!ZRkgnIhb!2NiQdN4Z9Yg8frL2r86eIbRZAE9oCN2TW_prQFzfn_k

  0  
  0  
#8
Options
Re:TL-PA4010 KIT AV600 Firmware
2019-12-14 00:08:57

@Kevin_X  thanks you for reply back.

 

How did you to find that firmware?

Can I trust?

 

Regads

Michele
  0  
  0  
#9
Options
Re:TL-PA4010 KIT AV600 Firmware
2019-12-14 12:05:02

@Mikhele

 

Yes, it is offiicial from Qualcomm. Nvm fits all with the same chip. Only pib file is different to the other powerline seller therefore use the one from tp-link. tp-link does not bring newer firmwares due to support costs money.

  0  
  0  
#10
Options
Re:TL-PA4010 KIT AV600 Firmware
2020-05-25 10:20:45

@Kevin_Z 

 

Could you please put EU version of the firmware online? I've upgraded my 4010s to the US version of the firmware and my rate dropped below 300mbits, while before it was around 500mbits.

 

I was not able to find original EU firmware for 4010 V3 anywhere on the internet.

 

Thank you very much.

  0  
  0  
#11
Options
Re:TL-PA4010 KIT AV600 Firmware
2020-06-03 18:15:21 - last edited 2020-06-03 18:15:41

the firmware has nothing to do with country regulations ( EU, US, UK, etc ). It is universal, and it is the same for all manufacturers using the same atheros/qualcomm chipset, device models, device versions, and countries. the .pib file is the one responsible to configure the device with the proper parameters, for instance regulation frequencies. So, in your case, select a .pib file for your device with the country of your choosing and use the .nmv file provided by @Kevin_Z 

  0  
  0  
#12
Options
Re:TL-PA4010 KIT AV600 Firmware
2020-06-03 18:15:21
the firmware has nothing to do with country regulations ( EU, US, UK, etc ). It is universal, and it is the same for all manufacturers using the same atheros/qualcomm chipset, device models, device versions, and countries. the .pib file is the one responsible to configure the device with the proper parameters, for instance regulation frequencies. So, in your case, select a .pib file for your device with the country of your choosing and use the .nmv file provided by @Kevin_X
  0  
  0  
#13
Options

Information

Helpful: 0

Views: 9544

Replies: 17

Related Articles