Home Network Community > Wi-Fi Routers > Can't see local devices after connecting to router's OpenVPN
< Wi-Fi Routers

Can't see local devices after connecting to router's OpenVPN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can't see local devices after connecting to router's OpenVPN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can't see local devices after connecting to router's OpenVPN
Can't see local devices after connecting to router's OpenVPN
2020-01-19 20:29:49
Model: Archer C6  
Hardware Version: V2
Firmware Version: 1.2.0 Build 20191014 rel.33289(4555)

Hello,
I configured OpenVPN in router settings, like it is in FAQ.
Default subnet is 192.168.1.0, and VPN subnet is 10.8.0.0.
Connection is UDP and i tried both client access options.
Remote IP is set to DDNS, becouse my public IP is dynamic.
This is how configuration file looks.

----------
client
dev tun
proto udp
float
nobind
cipher AES-128-CBC
comp-lzo adaptive
resolv-retry infinite
remote-cert-tls server
persist-key
persist-tun
remote adress port
<ca>
-----BEGIN CERTIFICATE-----
SOME KEY
-----END CERTIFICATE-----
</ca>
<cert>
-----BEGIN CERTIFICATE-----
SOME KEY
-----END CERTIFICATE-----
</cert>
<key>
-----BEGIN PRIVATE KEY-----
SOME KEY
-----END PRIVATE KEY-----
</key>

-------
I tried accessing local machine (remote desktop) using laptop connected to another network and router by OpenVPN connection.

  0      
 
  0      
 
#1
Options
2 Reply
Re:Can't see local devices after connecting to router's OpenVPN
2020-01-20 05:44:28

@wino97 

 

Once you connected to the router's OpenVPN, it will be detected as a different subnet from the device which connects to the local network.

 

You can try to enable remote management and verify whether you can access local devices. 

 

May it help. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Can't see local devices after connecting to router's OpenVPN
2020-01-20 09:11:32 - last edited 2020-01-20 09:12:56

@Kevin_Z 
Remote management doesn't change anything.
I tried connect remotely from my phone, and it works by PC name, but i can't connect trough VPN to remote desktop by name from laptop for some reason. (connecting by IP works)
I had some configuration in hosts file from the past, but i cleared it.
I tried ping PC name, and ping couldn't find device, on the other hand, connecting or pinging by name on local network works fine.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1175

Replies: 2

Related Articles
Can't access my local network devices
2443 0
Wifi connected devices can't see wired devices - DHCP issue?
563 0
Can't see all my devices on a apple net
257 0
Archer C6 can't see channel change option in wireless sertings
7625 0
See ALL connected devices?. See ALL connections?
65257 0
Can't connect Two onemesh router
63 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.