AC1750 and wifi 5GHz channel selection
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
I have a router Archer C7 (AC1750).
I only use it in wifi 5GHz mode.
Is it possible to force using DFS ? (in auto mode and without many network, dfs is not used)
Best regards
Frédéric
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello Frédéric, the Archer C7 does not support DFS, instead, only band 1 or band 4 are available now. So I'm afraid that it cannot satisfy your needs.
- Copy Link
- Report Inappropriate Content
Hello Frédéric, the Archer C7 does not support DFS, instead, only band 1 or band 4 are available now. So I'm afraid that it cannot satisfy your needs.
- Copy Link
- Report Inappropriate Content
Hi Kevin,
A friend has the same router but with hardware v2.0. The channel used for his network is 108 so it should be compatible with dfs isn't ?
My hardware v5.0 is not compatible with dfs ? Is it normal ?
Best regards
Fred
- Copy Link
- Report Inappropriate Content
Hi Fred, the channel supported may varies due to its hardware/firmware version, as well as the country version of the product.
You can tell me those information about your friend's product. And yours'.
Note: You can find the country version of the product on the back panel, next to the model number.
Good day.
- Copy Link
- Report Inappropriate Content
Ok bad news for me.... I've bought this router for this purpose.
No way to update it with a firmware which allow dfs ?
- Copy Link
- Report Inappropriate Content
Hi Fred, sorry to tell you that there is no way to make it support DFS.You can replace it with another router that supports DFS to satisfy your needs, like the AX6000.
- Copy Link
- Report Inappropriate Content
@fredou My Router Tp Linker Archer A7 AC1750, I am not able to find DFS enabling option. May I know what router support DFS ?
FYI,
I am from India
- Copy Link
- Report Inappropriate Content
srinivas.kesani wrote
@fredou My Router Tp Linker Archer A7 AC1750, I am not able to find DFS enabling option. May I know what router support DFS ?
FYI,
I am from India
Hello @srinivas.kesani, thank you for reaching out to us and welcome to the TP-Link community.
You can check the product specifications on the TP-Link official website as below, you will find DFS description if the model you are looking for supports it, such as Archer AX11000, AX90, GX90:
https://www.tp-link.com/compare/?typeId=9&productIds=29533%2C43434%2C49544
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 4633
Replies: 7
Voters 0
No one has voted for it yet.