netMakeChannDial: err=-3000 rn_p=8045eb6c

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

netMakeChannDial: err=-3000 rn_p=8045eb6c

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
netMakeChannDial: err=-3000 rn_p=8045eb6c
netMakeChannDial: err=-3000 rn_p=8045eb6c
2020-03-21 15:26:28 - last edited 2020-03-27 18:44:03
Model: TD-W8961N  
Hardware Version: V3
Firmware Version: 3.0.0 Build 170815 Rel.09118

From System Log: netMakeChannDial: err=-3000 rn_p=8045eb6c

In use have problem in some requests error ERR_CONNECTION_TIMED_OUT (not in add domain, but list of domain that give this error always the same)

  0      
  0      
#1
Options
1 Accepted Solution
Re:netMakeChannDial: err=-3000 rn_p=8045eb6c-Solution
2020-03-26 08:30:22 - last edited 2020-03-27 18:44:03

@Oleg_D  Hi, you can try to change the DNS to 8.8.8.8/8.8.4.4, change the TCP MTU Option to 1440 or 1400( Under Interface setup--Internet).

Recommended Solution
  3  
  3  
#4
Options
4 Reply
Re:netMakeChannDial: err=-3000 rn_p=8045eb6c
2020-03-23 06:37:12

@Oleg_D 

Hi, do you still have internet access when the system log shows some errors? What's the light status of the modem? Please tell us more details then we can help.

  0  
  0  
#2
Options
Re:netMakeChannDial: err=-3000 rn_p=8045eb6c
2020-03-23 23:27:18

@Stella.Q 

Hi, i have access to internet, all other work good when visited page not contain request to domain from list that return ERR_CONNECTION_TIMED_OUT.

So i have some sites that work normal, some partly work (site open but few frame or script inside not load), and other not answer anything.

 

Light status same as usual (green permanently or blink on transport data).

Also, few hour later - Last errorlog repeat 2805 Times.

 

Factory Default Settings make nothing changes.

  0  
  0  
#3
Options
Re:netMakeChannDial: err=-3000 rn_p=8045eb6c-Solution
2020-03-26 08:30:22 - last edited 2020-03-27 18:44:03

@Oleg_D  Hi, you can try to change the DNS to 8.8.8.8/8.8.4.4, change the TCP MTU Option to 1440 or 1400( Under Interface setup--Internet).

Recommended Solution
  3  
  3  
#4
Options
Re:netMakeChannDial: err=-3000 rn_p=8045eb6c
2020-03-27 18:40:43 - last edited 2020-04-09 09:01:46

@Stella.Q 

Hi, it help me (in many cases but not all), thank you. But sometimes it happen again - refresh page help there. Few later in other part of day first problem come back.

 

Now log look next:

1/1/2000 1:1:20> bridge only stop
1/1/2000 1:1:20> SNMP TRAP 3: link up
1/1/2000 1:1:20> Quick bridge not allow multi-channel
1/1/2000 1:1:20> bridge only stop
1/1/2000 1:1:20> SNMP TRAP 3: link up
1/1/2000 1:1:21> PPPoE: Send PADI
1/1/2000 1:1:21> PPPoE: Recieve PADO
1/1/2000 1:1:21> PPPoE: Send PADR
1/1/2000 1:1:21> PPPoE: Recieve PADO
1/1/2000 1:1:21> PPPoE: Recieve PADS
1/1/2000 1:1:22> PAP Authentication Successful
1/1/2000 1:1:22> ppp_ready: ch:804bb158, iface:803f89dc
1/1/2000 1:1:22> PPP get IP Address:178.95.4.90
1/1/2000 1:1:22> PPP gateway:195.5.5.200
1/1/2000 1:1:22> PPP subnetmask:255.255.255.255
1/1/2000 1:1:22> PPP primary DNS:213.179.249.164
1/1/2000 1:1:22> PPP secondary DNS:213.179.249.136
1/1/2000 1:1:22> SNMP TRAP 3: link up
1/1/2000 1:1:22> Accept() fail
1/1/2000 1:1:40> Last errorlog repeat 1 Times
1/1/2000 1:1:40> adjTimeTask fail: wrong domain name
1/1/2000 1:1:40> adjTimeTask fail: no server available
1/1/2000 1:1:40> adjtime task pause 1 day
1/1/2000 1:2:40> sending request to NTP server(a3)
1/1/2000 1:2:40> received from NTP server(a3)
3/28/2020 12:14:24> Adjust time to 5e7f3190
3/28/2020 12:14:24> adjtime task pause 1 day
3/28/2020 12:38:48> netMakeChannDial: err=-3000 rn_p=8045eb6c

 

This problem appear after switch on.

 

This problem not appear if on start modem all device's wi-fi searching are turned off.

  1  
  1  
#5
Options