Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
507 Reply
Re:Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually
2021-04-23 08:46:26

@Satheskumar 

Rahul_101

 

HI, the beta firmware that added band selection for Archer MR600 V1:

https://static.tp-link.com/2020/202012/20201207/Archer_MR600v1_1.1.0_0.9.1_[201204-rel66940]_up_boot_2020-12-04_19.05.35.zip

and the official firmware for Archer MR600 V2 is already released:

https://www.tp-link.com/en/support/download/archer-mr600/v2/#Firmware

 

 

@badbackbilly, the firmware of V2 could not be installed on the V1;

 

As for the official firmware for V1 to support band selection, I am sorry that there is no ETA yet and please keep attention to the official website;

 

PS: since this thread is long enough, the beta firmware has been posted at the beginning of the thread;

If you have some other issues, it is recommended to start a new thread or leave me a private message for notice:

Thank you.

  0  
  0  
#499
Options
Re:Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually
2021-04-27 04:59:30
I am facing some different issue every time with this beta version.. Like devices not connecting with WIFI, router console not responding and required restart, bank selection hangs, etc. https://static.tp-link.com/2020/202012/20201207/Archer_MR600v1_1.1.0_0.9.1_[201204-rel66940]_up_boot_2020-12-04_19.05.35.zip LET ME GO WITH PREVIOUS BETA VERSION.
  0  
  0  
#501
Options
Re:Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually
2021-04-28 08:28:35

when will be NOT BETA, cause these waterlogo really #$%^&*....

  0  
  0  
#502
Options
Re:Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually
2021-05-04 15:55:43

@darant 

Hi. On V2 hardware is it possible to manually select 4g bands? i want to buy this router and i'd like to know  if version 2 support this feature

darant wrote

Hi all,

 

Following the long thread on the same subject discssing the BETA FW, as I said I would, TPLink have given me permission to share the FW download llink.

 

From TPLink - We recently released a beta firmware for Archer MR600(EU) V1 which can allow us to select 4G+bands for Archer MR600 manually.

https://static.tp-link.com/2020/202004/20200420/Archer_MR600v1_1.1.0_0.9.1_[200417-rel75138]_up_boot_2020-04-20_08.44.31.zip

For Archer MR600, if you want to use its 4G+network, your SIM card should support the CA bands group Archer MR400 supports. Please check the attached picture and check if your SIM card supports the band groups on the list or not.

 

They asked me to state that, this BETA FW is for the Archer MR600(EU) V1 ONLY!

 

Neither TPLink nor me take any respnsbility if you flash a none-EU router.

 

. thanks

darant wrote

Hi all,

 

Following the long thread on the same subject discssing the BETA FW, as I said I would, TPLink have given me permission to share the FW download llink.

 

From TPLink - We recently released a beta firmware for Archer MR600(EU) V1 which can allow us to select 4G+bands for Archer MR600 manually.

https://static.tp-link.com/2020/202004/20200420/Archer_MR600v1_1.1.0_0.9.1_[200417-rel75138]_up_boot_2020-04-20_08.44.31.zip

For Archer MR600, if you want to use its 4G+network, your SIM card should support the CA bands group Archer MR400 supports. Please check the attached picture and check if your SIM card supports the band groups on the list or not.

 

They asked me to state that, this BETA FW is for the Archer MR600(EU) V1 ONLY!

 

Neither TPLink nor me take any respnsbility if you flash a none-EU router.

 

 

  0  
  0  
#503
Options
Re:Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually
2021-05-04 16:00:41

@hawk82 

 

I would not buy this router, I would look for an alternative. Since to select the band you will have to enter a beta and lose functionalities.

  0  
  0  
#504
Options
Re:Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually
2021-05-04 16:12:58
thanks. But i woud understand if version harware 2 (V2) has already an official firmware that allows to manually select 4g bands.
  0  
  0  
#505
Options
Re:Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually
2021-05-11 09:36:43

@darant 

 

What are the benefits for having this band selection available?

 

Currently my parameteres are:

 

What will I gain with this sort of new option.

 

 

Cheers

  0  
  0  
#506
Options
Re:Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually
2021-05-11 11:01:05

@MrWhity 

A picture is worth a thousand words. Find the difference:

Is the test record from the router:

 

  0  
  0  
#507
Options
Re:Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually
2021-05-11 12:15:50
  0  
  0  
#508
Options
Re:Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually
2021-05-11 12:37:10

@darant 

 

hello I  tried to install in my archer V1 and impossible to flash.

 

My current firmware is 1.2.0 0.9.1 v0001.0 Build 200511 Rel.44954n

 

Thanks

  0  
  0  
#509
Options