Archer T2U Nano V1 low WiFi speeds
I have an Archer T2U Nano and I am limited to 150Mbps on it. I am on a 5Ghz connection, so it should be 433Mbps as per the advertised capability of the device. This is the output of the command "netsh wlan show interfaces" on my PC:
There is 1 interface on the system:
Name : Wi-Fi 3
Description : TP-Link Wireless Nano USB Adapter
GUID : a3235346-7dc6-4754-94cf-7a5281f43118
Physical address : d0:37:45:87:ba:c8
State : connected
SSID : NUS_STU
BSSID : 24:f2:7f:09:63:11
Network type : Infrastructure
Radio type : 802.11n
Authentication : WPA2-Enterprise
Cipher : CCMP
Connection mode : Auto Connect
Channel : 116
Receive rate (Mbps) : 150
Transmit rate (Mbps) : 150
Signal : 96%
Profile : NUS_STU
Hosted network status : Not available
On my laptop which has an Intel AC9260, I can see that the command output shows 300Mbps instead of 150Mbps and the resulting connection is much faster than the one I get on my desktop with this adapter.
I am using Windows 10 drivers I got from this page: https://www.tp-link.com/en/support/download/archer-t2u-nano/#Driver
What can I do to get the full speed from this adapter?