Wifi spport password
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Ip 192.168.1.254 not working so I cannot enter to the router and I cannot do password for protect my Wi-Fi please help me
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, sorry to hear that you have trouble with our device.
Sorry to make you wait for so long.
Please take the below suggestion to enter the management page of the device TL-WA701ND v2.
1. Connect your PC to the Access Point with the Ethernet cable or via wireless. The default SSID of the Access Point is TP-LINK_ XXXXXX. The XXXXXX is the last 6 characters of the Access Point’s MAC.
2. Open a browser on your PC, then input 192.169.0.254 or http://tplinkap.net into the address bar to enter.
A dialog box will prompt you for the Username and Password. Enter the default username and password both admin and click OK to enter.
If it still doesn't work, please follow the instruction to check the IP address, default gateway for us on your PC. https://www.tp-link.com/support/faq/838/
You can also try to reset it and repeat it again to check if it works.
Note: With the device powered on, press and hold the WPS/RESET button (more than 5 seconds) until the SYS LED becomes quick-flash from slow-flash. Then release the button and wait the Access Point to reboot to its factory default settings.
Look forward to your reply.
Have a nice day!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 855
Replies: 1
Voters 0
No one has voted for it yet.