Archer AX6000 2.4 GHz not working
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello!
I seem to be having a similar issue to other users.
After a clean start, both 2.4 and 5G work fine. Usually several hours later, the 2.4 band becomes unavailable. It doesn't appear on any of my devices for more than a brief and occasional moment, and I can't connect to it. 5G works just fine.
I did a factory reset, and the issue happened again.
Is there a beta firmware that can solve this? Or are there steps I can take to clarify the issue at hand?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I mean that the WiFi network even does not appear in the list. All my IoT devices are currently offline. The only 5G devices can connect to WiFi using 5G network.
- Copy Link
- Report Inappropriate Content
I see.
If the 2.4G signal doesn't even show up on the AX6000 and no device can detect the signal, you have already tried the basic troubleshooting suggestions, I think the 2.4G might be faulty, please contact the local tech support to confirm the warranty:
https://www.tp-link.com/en/support/contact-technical-support/#Hotline-Support
Good day.
- Copy Link
- Report Inappropriate Content
try to set the wifi off and save/ than than set the wifi to on. It wil activate an wil be online
I have the same problems.
- Copy Link
- Report Inappropriate Content
that it is problem there is no longer any response from your side. The Dutch customer service also does not receive an answer from you. Really very disappointing company tplink.
- Copy Link
- Report Inappropriate Content
Hi, we can assure that our engineers contacted you on Dec 10, 2020, while it seems there is no response on your side again, you may check your email box again carefully, as it seems you sometimes not respond based on the latest reply from our engineer.
- Copy Link
- Report Inappropriate Content
I've sent a mail but there is no response. The mail has been sent previous week to support.ro@tp-link.com
- Copy Link
- Report Inappropriate Content
Hi, there might be some delay for the email response due to the COVID-19, we will confirm this, please check your email box.
- Copy Link
- Report Inappropriate Content
I bought my AX6000 March 2020. Up until about 2 weeks ago it worked great, then one day 2.4 wifi just died completely. Everything looks find from admin page, enable, show SSID but none of my devices see it anymore, and can't even find the SSID for a new connection. Tried manually doing the SSID and password and not found. Did manufacture reset and did the minimal config just to test the 2.4 wifi and nothing, completely dead. 5g working great. Worked with TPLink to get a replacement. Had an identical AX6000 from work i used in the mean time and had no issues with that 2.4 wifi for a week or more. When i got my replacement i configured and used it for 1day and a half and the 2.4 wifi completely just like the original.... They have escalated to higher level support before sending another replacement. Will let you guys know what happens.
I worked with support on all the common trouble shooting like setting channel, and channel width, and selecting a mode without AX, factory reset and removing all other wired connections, latest firmware (and they had me try a newer firmware you could only download from their site, not through update tool). Nothing worked. Once the 2.4 wifi died, i never once saw it work again in all in the trouble shooting i did. Same with this replacement router.
- Copy Link
- Report Inappropriate Content
Thanks for bringing this up. Please keep in touch with the engineers, they will try to analyze and provide a solution.
- Copy Link
- Report Inappropriate Content
@Ripp Well, my replacement has just died after 6 months, 2.4ghz wifi went out and won't come back but everything else works fine, just like the last two. As long as they replace under warranty i will continue to use but if they don't i'm going another brand. I really liked the router when it works....
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 5876
Replies: 30
Voters 1
