Slow speed if i connect my pc to the first deco with cable

Slow speed if i connect my pc to the first deco with cable
Slow speed if i connect my pc to the first deco with cable
2020-07-15 20:28:35
Hardware Version: V1
Firmware Version: 1.4.0

Hi,

 

When i wire connect my computer directly to the internet without any deco i get around 480Mbps.

if i wire connect the internet direct to my first deco and then connect my pc wired direct to the other port on my deco i get like 300 Mbps.

So it sems like the deco slower my speed if i go thru the deco.

What can i do to solve this?

0
0
#1
Options
1 Reply
Re:Slow speed if i connect my pc to the first deco with cable
2020-07-17 08:50:35

@Swoop 

 

Hello, sorry about that.

 

With your computer connected to the modem/internet directly, please verify the actual speed you can get via speedtest.net. Also, please confirm the wired link speed as the instruction below:

https://www.tp-link.com/support/faq/2265/

Please then connect your computer to the main deco and test the speed you can get from it via speedtest.net as well and check the wired link speed.
Note: Please show us a screenshot of the speed test result.

 

Please also run the speedtest on the Deco app and show us the result.

 

Additionally, please refer to the below troubleshooting to check the QoS settings on the Deco app:

https://www.tp-link.com/en/support/faq/2429/#case%201  (Case 1)

 

After that, please run the speed test again and check whether it improves.

 

Good days.

0
0
#2
Options