Ports Closed Despite Triggering

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Ports Closed Despite Triggering

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Ports Closed Despite Triggering
Ports Closed Despite Triggering
2020-07-31 05:21:13 - last edited 2020-07-31 09:37:47
Model: Archer AX1500  
Hardware Version: V1
Firmware Version: 1.0.8

Hi everyone,

I'm trying to run a dedicated server for Ark: Survival Evolved and I've entered all the ports into port triggering but whenever I check to see if the connection is visible (querying port 27015) on sites such as canyouseeme.org, the site says: Error: I could not see your service on <IPADDRESS> on port (27015).

 

I've read that Ark requires the following ports to be opened:

  • TCP: 25147,27015-27030,27036-27037
  • UDP: 4380,7777-7778,25147,27000-27031,27036

and my port triggering is configured as follows:

Full disclaimer, I have no idea if I've configured the port triggering properly. I was pretty confident with port forwarding but I'm pretty clueless with port triggering.

 

Also I read that running telnet 127.0.0.1 27015 would query the port but that returns:

Connecting To 127.0.0.1...Could not open connection to the host, on port 27015: Connect failed.

 

Any ideas what could be the issue?

 

EDIT: Updated the firmware version to 1.0.8 and the issue persists.

  0      
  0      
#1
Options